Xantia Exclusive Hdi - Breaking

gadgetgricey · Unread post by **gadgetgricey** » 28 May 2013, 08:01

Basically bought this Hdi as a spares car, but due to space issues its got to go by the end of this week.
Interior and wheels already gone, but what would be the other useful bits to remove (front struts being one of them)

Thanks

- Dave -

citronut · Unread post by **citronut** » 28 May 2013, 08:08

height corrector cradles front and rear, brake calipers???, hydraulic pump, alternator, starter motor,

really depends how far you wish to go, and storage space at the end of the day

c.morewood · Unread post by **c.morewood** » 28 May 2013, 09:16

Depending on the RPO number the rear suspension cylinders

Injectors, electrovalves, MAF, rear wiper motor, if it works. rear brake calipers, undertray.
Just a few things I have needed in the past.. the cylinders are important to a few of us though.
And I suspect will become more important as the Xantia ages.

isisalar · Unread post by **isisalar** » 28 May 2013, 10:19

Wouldn't mind first dibs on the injectors.
Cheers
Paul

Unread post by **electronmirror** » 29 May 2013, 16:25

I'd be interested in the Eberspacher auxiliary heater if it's available.

gadgetgricey · Unread post by **gadgetgricey** » 29 May 2013, 17:05

isisalar wrote:Wouldn't mind first dibs on the injectors.
Cheers
Paul

electronmirror wrote:I'd be interested in the Eberspacher auxiliary heater if it's available.

No Problem both, going to try and remove most bits tomorrow.
Will update the thread accordingly.

If anyone else wants anything, get back to me.

Thanks

- Dave -

c.morewood · Unread post by **c.morewood** » 29 May 2013, 17:52

whats the RPO number Dave?

gadgetgricey · Unread post by **gadgetgricey** » 29 May 2013, 18:13

c.morewood wrote:whats the RPO number Dave?

Once again showing my total ignorance.
What is it and where is it?

- Dave -

citronut · Unread post by **citronut** » 29 May 2013, 18:24

RP No. is on the tyre pressure label in the drivers door shut

gadgetgricey · Unread post by **gadgetgricey** » 29 May 2013, 22:36

citronut wrote:RP No. is on the tyre pressure label in the drivers door shut

Could not see anything that stated RPO number, just the following.

08285CJ
10336
EYCC**
19700336

Hope that helps.

Cheers

- Dave -

Citroenmad · Unread post by **Citroenmad** » 29 May 2013, 22:41

8285 is your RP number

c.morewood · Unread post by **c.morewood** » 29 May 2013, 23:50

5 days away from mine!!! You've got a pair of those rare rear cylinders Dave

gadgetgricey · Unread post by **gadgetgricey** » 30 May 2013, 07:49

c.morewood wrote:5 days away from mine!!! You've got a pair of those rare rear cylinders Dave

Once again showing my ignorance on things Citroen. What are they, and where are they?
I'm assuming the cylinders are different to the spheres?

Thanks

- Dave -

citronut · Unread post by **citronut** » 30 May 2013, 08:08

the cylinder/rear suspension ram is what the sphere screws into

addo · Unread post by **addo** » 30 May 2013, 08:11

Yes, and for a brief period they changed the pipe fittings at the cylinder end. These oddball cylinders and their feed pipes, are discontinued.

French Car Forum

Xantia Exclusive Hdi - Breaking

Xantia Exclusive Hdi - Breaking

Re: Xantia Exclusive Hdi - Breaking

Re: Xantia Exclusive Hdi - Breaking

Re: Xantia Exclusive Hdi - Breaking

Re: Xantia Exclusive Hdi - Breaking

Re: Xantia Exclusive Hdi - Breaking

Re: Xantia Exclusive Hdi - Breaking

Re: Xantia Exclusive Hdi - Breaking

Re: Xantia Exclusive Hdi - Breaking

Re: Xantia Exclusive Hdi - Breaking

Re: Xantia Exclusive Hdi - Breaking

Re: Xantia Exclusive Hdi - Breaking

Re: Xantia Exclusive Hdi - Breaking

Re: Xantia Exclusive Hdi - Breaking