Thnk there might be a hole in my exhaust....

Unread post by **RichardW** » 02 Mar 2013, 23:25

....so said our friend that came round to babysit tonight, reporting that it sounds a 'bit noisy'. She's got an X Reg Xantia HDi 90 hatch, so still being in work clothes and with a torch in my pocket I went out to have a look. Soon saw the problem. The exhaust has failed at the back of the cat. And at the inlet to the rear box. The bit inbetween (about 4 feet of it) is totally absent

No wonder it was a bit noisy - that is the best failure I have ever seen! A quick look underneath also revealed knackered drop links, totally mullered wishbone bushes, and a reasonable leak from the pinion valve. Not likely to pass its next MOT (due soon) then, so the exhaust is somewhat arbitrary....!

Unread post by **CitroJim** » 03 Mar 2013, 08:33

Sounds like you're going to be a bit busy soon Richard

addo · Unread post by **addo** » 03 Mar 2013, 10:02

RichardW wrote:Think there might be a hole in my exhaust....

Can your colleagues see sunshine through it?

c.morewood · Unread post by **c.morewood** » 03 Mar 2013, 10:51

Must weld the exhaust... must weld the exhaust.....must weld the exhaust

Unread post by **CitroJim** » 03 Mar 2013, 14:17

to all of that...

taffy · Unread post by **taffy** » 03 Mar 2013, 15:46

ive got same prob at mo it come of once from cat so had it welded and this time it off from cat and bk box its now unrepairable and gsf told me im gona have a problem gettin cat and middle now!
might have to go ssteel route i think
any suggestions?

Mandrake · Unread post by **Mandrake** » 03 Mar 2013, 16:44

So, err, a bit worse than mine was then Richard ?

French Car Forum

Thnk there might be a hole in my exhaust....

Thnk there might be a hole in my exhaust....

Re: Thnk there might be a hole in my exhaust....

Re: Thnk there might be a hole in my exhaust....

Re: Thnk there might be a hole in my exhaust....

Re: Thnk there might be a hole in my exhaust....

Re: Thnk there might be a hole in my exhaust....