Berlingo interior door panel

coopster · Unread post by **coopster** » 09 Apr 2004, 12:28

Finally found a great site regarding citroens! Hallellujah!
Anyway - my problem is that I tried opening the drivers window whilst it was still frozen in the seal. After a loud crunch, it seems I have "broken" something inside.[:I]
Has anyone got any ideas how to remove the interior door panel so that I can attempt to fix whatever I've broken?
Cheers

Unread post by **RichardW** » 09 Apr 2004, 12:45

Don't know about the Berlingo specifically, but normally you need to unscrew the arm rest (look underneath it), possibly some screws in / around the speaker aperature, remove the window switches or winder (winder may have a spring clip behind it you need to lever out), remove the locking button (may unscrew if it's round, if it's one of Citroen's square ones, push in the tab you will see just above the door trim, then it pulls off. Now, carefully start pulling the panel from the door, and slip a broad bladed screwdriver in behind it. Work the screwdriver around the door and each time you come to plastic clip (they're about 1/2" in from the edge of the panel usually) carefully lever it out of the door - keep the screwdriver as close as possible to the clip to prevent it breaking out of the panel. If the panel won't come off after you've popped all the clips out, you need to take more trim off - trial and error will get you there eventually!