Brake pad wear light ( Xantia)

Tebster · Unread post by **Tebster** » 09 Apr 2004, 03:09

Hi,
Can anyone help me locate the wires which are supposed to go to the front discs to operate the pad warning light.
All the wires are missing off both sides but cant seem to locate where they were supposed to plug into the main loom.
Have looked underneath the car to the rear inwards of the front wheels but there doesnt seem to be any spare plugs etc.
The reason I need to find these is because the pad wear light is permanantly on, and fear someone may have cut them off and maybe shorting on the body somewhere.
Your help will be appreciated,
Thank you
Paul [:)]

JohnD · Unread post by **JohnD** » 09 Apr 2004, 03:24

The wires from the pads should plug into a socket behind the front hub and attached to the suspension column. If the light is constantly on, the cable end must be shorting on to the body

Tebster · Unread post by **Tebster** » 09 Apr 2004, 03:34

Thank you for your reply but none of the wires are there, someone has had their wire cutters out before I got the car I think, cant even find the plugs on the main loom either.
Ta Paul

Stempy · Unread post by **Stempy** » 09 Apr 2004, 03:40

Not all models had the pad wear wiring, so maybe yours is one of them

Tebster · Unread post by **Tebster** » 09 Apr 2004, 12:21

Thank you for your reply but this is a 1999 sx model, am pretty sure that they are supposd to have a brake pad wear light. I maybe wrong but why would the warning light suddenly come on and stay on, its been fully illuminated now for a week and just fickers occasionally ?

Unread post by **RichardW** » 09 Apr 2004, 12:32

Which light is it? It might be the ABS light rather than the pad wear light? I can't see anybody cutting them off - I just don't bother to fit the wires to the pads and leave the socket on the hub.

Tebster · Unread post by **Tebster** » 09 Apr 2004, 12:36

Its definately not the abs light,but definately the pad wear, my guess is as good as yours but the wires have gone and this light is bugging me...lol

Homer · Unread post by **Homer** » 09 Apr 2004, 13:12

The connector is usually secured to the handbrake cable but where they go after that I don't know. I'm pretty certain they don't follow the handbrake cable.
There really shouldn't be any reason for anyone to cut them back beyond that connector on a car that age anyway.
I'm sure somebody will have a wheel off this weekend and take a look for you.

Homer · Unread post by **Homer** » 09 Apr 2004, 18:18

OK, I had a qick squint behind the wheel and I must have been thinking of the BX.
The plug seems to be to the front of the hub, not far from the ABS sensor, the wires disappear straight back along the line of the driveshaft. Looks to have thick insulation and sturdy clips.
Mines a facelifted '98 model.

Tebster · Unread post by **Tebster** » 09 Apr 2004, 21:42

Thank you for finding the time to have a look, on my Xantia there is no sign of the wires you have mentioned,have also looked underneath by the power steering rack etc and no sign of any spare plugs etc, will have to get the old inspection lamp out and spend a bit more time looking as this flickering light is drivin me nuts !