BX door and door stay pins

DLM · Unread post by **DLM** » 07 Apr 2004, 03:00

I removed the doors from a scrap BX last year using the Clarke door pin tool set (3 pin tools, 1 double-ended bar) - and will have to repeat the process shortly. However, in the interim I seem to have lost the smallest size pin tool.
I seem to remember that the door hinges need the medium tool and the stays need the smallest one. Can anyone confirm?
Any smart-ass comments in reply are probably well-deserved after the last couple of posts I've made.....

vanny · Unread post by **vanny** » 07 Apr 2004, 04:02

ha ha, well u asked!
Maybe be ask Clarke if they have a duplicate f the missing one that they dont want?

uhn113x · Unread post by **uhn113x** » 07 Apr 2004, 13:09

DLM
You can get all spares for Clark badged stuff - contact your local Machine Mart or do a google.
I made a hinge pin remover from a scrap drill shank and a bit of 10mm square bar - idea from Bob Smith

oilyspanner · Unread post by **oilyspanner** » 07 Apr 2004, 16:00

I took em all out with the smallest, why take the pins out. wait a while and the whole thing falls off anyway!
Stewart

DLM · Unread post by **DLM** » 07 Apr 2004, 19:15

Thanks all - probably was the one I lost or broke (sod's law). I'm doing it this way because:
(1) Somebody else wants the door in one piece - so better do it properly
(2) Car is miles away from any power source (so I can't use your favourite angle grinder method, Vanny!)
(3) It won't drop off soon enough ....