Catalytic Converters

windysurferuk · Unread post by **windysurferuk** » 22 Mar 2010, 19:22

The exhaust has started blowing just before the catalytic converter

My MOT is due at the end of this week and I'm hoping they can get away with welding the exhaust up.
If not can you buy this section of the exhaust without the Cat?
Failing that wheres the cheapest place to get one

cheers
Windy

Xaccers · Unread post by **Xaccers** » 22 Mar 2010, 19:50

Doing a quick search comes back with the 2.1TD only coming with a CAT in the UK at least, unlike the 1.9TD.
I would see how much it'd cost to weld in a straight section to replace the CAT.
Otherwise you're looking at £78 excl VAT and delivery for a replacement.

falling-out-with-my-car · 23 Mar 2010, 17:55

Had a look online at Cat's Direct and its the same system as the 1.9TD Mk2 xantia, what you need is a 1995 Xantia front pipe, this will replace the cat and the middle box and go straight to the back box.

as diesels dont need a cat it'll be fine.

take a look at cat's direct do some comparing between mocdels and you'll find they are the same pipes.

UI went to kwik fit and they removed my holed cat and replaced it with a straight through pipe for the earlier model.

regards Nigel.

Xaccers · Unread post by **Xaccers** » 23 Mar 2010, 18:34

falling-out-with-my-car wrote:Had a look online at Cat's Direct and its the same system as the 1.9TD Mk2 xantia, what you need is a 1995 Xantia front pipe, this will replace the cat and the middle box and go straight to the back box.

as diesels dont need a cat it'll be fine.

take a look at cat's direct do some comparing between mocdels and you'll find they are the same pipes.

UI went to kwik fit and they removed my holed cat and replaced it with a straight through pipe for the earlier model.

regards Nigel.

Bloody cats direct not making their "next" button clear enough

windysurferuk · Unread post by **windysurferuk** » 23 Mar 2010, 19:10

MOT station are going to weld a patch on to get it though MOT but this info's great for a long term fix. cheers

Xaccers · Unread post by **Xaccers** » 23 Mar 2010, 19:12

Actually you've reminded me that I've got a straight through pipe that needs to go on Cassy to decat her.

windysurferuk · Unread post by **windysurferuk** » 23 Mar 2010, 20:25

is this the one I need?

http://www.cats-direct-shop.co.uk/exhau ... cordID=364

Xaccers · Unread post by **Xaccers** » 23 Mar 2010, 20:39

Yup, looks like the right one.
Interesting it's the same on both the estate and hatchback.

falling-out-with-my-car · 24 Mar 2010, 22:11

Xac wrote:
falling-out-with-my-car wrote:Had a look online at Cat's Direct and its the same system as the 1.9TD Mk2 xantia, what you need is a 1995 Xantia front pipe, this will replace the cat and the middle box and go straight to the back box.

as diesels dont need a cat it'll be fine.

take a look at cat's direct do some comparing between mocdels and you'll find they are the same pipes.

UI went to kwik fit and they removed my holed cat and replaced it with a straight through pipe for the earlier model.

regards Nigel.
Bloody cats direct not making their "next" button clear enough

its at the top of the page in big bold red letters ...lol

thats it windy spot on Kwik fit supplied it and fitted it for £70 with a 2 year guarrentee which was just as well because I had to go back twice to have it tighened up against the manifold and another new gasket fitted. the big long down pipe seems to like moving about a lot on the xantia estate.

you will notice much better acceleration without the cat clogging up the engine with exhaust smoke, the car will feel like it wants to take off for a while,a big improvement.

dont go to kwik fit for a backbox though they charged me £100 which is a rip off figure esspecially as its available for 50% less elsewhwere.