Xantia- Heavy steering and front end whine

This is the Forum for all your Citroen Technical Questions, Problems or Advice.
User avatar
Dommo
(Donor 2025)
Posts: 1208
Joined: 11 Apr 2009, 09:43
x 20

Unread post by Dommo »

I personally did what Peter N suggests.

What I do is fit an allen key into the hole, get a deep drive socket thats a tight fit on the allen key, fit an extension bar to that, and then try to undo it. What I find is that when it does start to go it makes a god awful squealing sound so don't be alarmed if that does happen.


Edited for a typo
Last edited by Dommo on 10 Mar 2010, 17:49, edited 1 time in total.
Peter.N.
Moderating Team
Posts: 11770
Joined: 02 Apr 2005, 16:11
x 1239

Unread post by Peter.N. »

You need a decent allen key too, or you twist the end off :( :?
mark230678
Posts: 83
Joined: 21 Feb 2010, 14:56

Unread post by mark230678 »

will give it a go in the morning, ordered part and bought some decent allen keys
just need to get the seals for the pump from the dealer
mark230678
Posts: 83
Joined: 21 Feb 2010, 14:56

Unread post by mark230678 »

would the leaking pump cause there to be no power steering??( or very little)
or could the pump just not be working??
can i check anywhere else

also will the pump off a 1.9td fit a 2.0hdi??
Last edited by mark230678 on 11 Mar 2010, 20:29, edited 1 time in total.
citroenxm
Fallen Hero
Posts: 8061
Joined: 30 Dec 2004, 23:10
x 70

Unread post by citroenxm »

If air has got in yes.. or possibly

A car equpit with Anti sink will stay up if system pressure remains below a certain perssure, this is because the anti sink valves stay shut keeping the suspension up..

The only other detection of no pressure is NO brakes...

Paul
Sharing a pug 207 1.6 hdi Sw 16v.
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project

A very sad...
1994 XM 2.1 d auto
mark230678
Posts: 83
Joined: 21 Feb 2010, 14:56

Unread post by mark230678 »

brakes are fine
how'd you get the air out??
mark230678
Posts: 83
Joined: 21 Feb 2010, 14:56

Unread post by mark230678 »

have done the seal, and it has not made a great deal of difference to the steering
still stiff