2001 C5 2.0 HDI 110 OBD II Compliant?

dnsey · Unread post by **dnsey** » 02 Apr 2009, 08:44

I'm picking up an early C5 HDI at the weekend, and wondered if anyone can tell me if it's OBD II compliant, at least as far as reading basic fault codes etc.
Can anyone help, please?

citronut · Unread post by **citronut** » 02 Apr 2009, 08:53

it dose have an EOBD socket of sorts, and depends on its year to how much some aftermarket scanners can read/see

regards malcolm

Citroenmad · Unread post by **Citroenmad** » 02 Apr 2009, 17:02

I have a scanguage, its a plug in thing which can clear basic codes, but mainly it reads out technical info.

Such as MPG, actual MPH, coolent temp, MAF, Engine load etc. I got it for my last car as it did not have a MPG readout, which i like.

However, this does not work with the C5s, it plugs in but fails to connect. Maybe something to do with the C5 system?

The plug port is in the glovebax, there is a small panel with a tray attatched, this pulls off and has the fuse box and plug behind.

Incedentally, the C5s MPG computer is a little on the low side. Mine seems to manage 7MPG more that it tells me its doing

Which is great, im glad it doesnt over read

jmd · Unread post by **jmd** » 17 Jul 2009, 14:14

Thinking about buying a Scanguage 11 for my 00 Xantia HDi, your experiences in using would be appreciated

JamesQB · Unread post by **JamesQB** » 17 Jul 2009, 17:36

European cars are only OBDII compliant in general if:

- Petrol made after 2001.
- Diesel made after 2004.

Our 2003 C3 HDi is not compliant, I've checked using its VIN on the service website, which states it is not compliant, and have connected an OBDII scanner with no success - won't connect.

KevMayer · Unread post by **KevMayer** » 17 Jul 2009, 20:29

The HDi Citroens aren't OBD 11 compliant until 2004 ish.

Lexia or Proxia works fine.

My 2002 C5 doesn't work with OBD 11 scanners.

My 2 daughters have each got a W reg ( 2000 ) Saxo 1.1 petrol. They are 2 months apart on first registration date. The older one won't connect to OBD scanners but the slightly younger one will.

meexi · Unread post by **meexi** » 17 Jul 2009, 20:47

Both my cars work with my scanner i got it on e-bay for about £30.00 dont know what make as i am not going out to the garage in this storm

Sid_the_Squid · Unread post by **Sid_the_Squid** » 17 Jul 2009, 21:11

I think I've posted this before somewhere but the 2000 HDi (110) Xantia defiantly works with ODB2 protocol devices, I have a cheap ELM 327 unit that had no trouble talking to my HDi. However it seems to be the only Xantia which will talk to ODB2 devices.
From what I understand the C5 HDi's don't talk to ODB2 devices, strange huh.

steelcityuk · Unread post by **steelcityuk** » 18 Jul 2009, 00:40

It could be that the ELM scanner is actually translating the the L and K line infomation via software. Nice to know that some cheap readers work after all.

More infomation here - http://en.wikipedia.org/wiki/On-board_diagnostics

Keep in mind that generic scanners are generally only able to give basic information and that this could be misleading.

My 53 plate C5 2.0 HDI won't work with an OBD device I have to use a Lexia.

Steve.

citronut · Unread post by **citronut** » 18 Jul 2009, 09:30

i thought the European standerd is EOBD, as the E states European,

but as stated earlier it was legislated all European cars

petrol from 01
diesel from 04

must be E/OBD compliant

even though the car manufacturerd in there wisdom still thought they would be clever, and have manufacturerd dedicated pins (cheaky)

regards malcolm