ZX Heater Matrix?
-
AndyGimpy
- Posts: 34
- Joined: 12 Dec 2002, 17:05
ZX Heater Matrix?
Well its that time of year when you just start to add a touch of heat to the inside of the car and this morning when I turned it on there was that horrible antifreeze smell coming from the vents. No noticeble steam and no loss of water in the header tank. The carpet is dry so I am assuming the matrix is just starting to weep!. Now I have been told this is a big job and involves removal of the complete dashboard. Does anyone have any good tips or shortcuts I can take as any help would be appreciated.[V]
-
CITMAN
- Posts: 407
- Joined: 02 Aug 2002, 00:22
-
Jon
-
AndyGimpy
- Posts: 34
- Joined: 12 Dec 2002, 17:05
-
wrinklet1
- Posts: 707
- Joined: 23 Nov 2002, 19:15
Hi, I did the matrix on my Xantia and followed the Haynes manual. Not too hard of a job really! One tip though, make sure you have a set ot long reach sockets as you may need them to release the dashboard from the bulkhead.
Good luck
Paul
PS It took me a day to do the whole job, from strat to finish.
Good luck
Paul
PS It took me a day to do the whole job, from strat to finish.
-
Dave Burns
- Posts: 1915
- Joined: 14 May 2001, 05:30
- x 2
-
jeremy
- Posts: 3959
- Joined: 20 Oct 2002, 16:00
- x 2
-
CITMAN
- Posts: 407
- Joined: 02 Aug 2002, 00:22