Xantia Estate Rear Suspension Arm Bush Kit

Mandrake · Unread post by **Mandrake** » 24 Feb 2007, 20:01

ellevie wrote:
Mandrake wrote:Can someone tell me the approximate size/weight of a bearing/seal kit ? (For a hatchback)
SKF VKDA 23001 Rear Arm Bering Kit for BX

Bolt/Nut/Washer.....427g
Spacer ...................275g
Bearings x2............150g
Thrust Bushes x2.....80g
Seals x2...................25g
Dust Cover...............20g
Box ........................115g

Total......................1092g

box dimensions.....330x75x105 mm

The bolt, spacer, thrust bushes and possibly the dust cover should be reusable.

GSF and others do the bearings and seals separately.

Regards,
David

Thanks!

I know the bearings are the same between the BX and Xantia, but are all the other bits like the thrust bushes, seals, dust covers etc also the same ?

Regards,
Simon

AndersDK · Unread post by **AndersDK** » 24 Feb 2007, 20:34

Mandrake wrote:
I know the bearings are the same between the BX and Xantia, but are all the other bits like the thrust bushes, seals, dust covers etc also the same ?

Regards,
Simon

Yes. Exactly, precisely and 100% accurately the same bits.

Mandrake · Unread post by **Mandrake** » 24 Feb 2007, 20:48

AndersDK wrote:
Mandrake wrote:
I know the bearings are the same between the BX and Xantia, but are all the other bits like the thrust bushes, seals, dust covers etc also the same ?

Regards,
Simon
Yes. Exactly, precisely and 100% accurately the same bits.

Great.

Here in NZ I'm probably better off getting the bearing kit directly through SKF, so I'll try the above part number at a local SKF supplier and see if they have it listed...

Regards,
Simon