105 1.5xnd, Locknut size?? (4 stud wheel)

abrocky · Unread post by **abrocky** » 13 Mar 2006, 23:09

Hi
I need to know the size of the locknut on a the stated car....

I usually use my uncles tools, a i cannot afford my own (student)... he is currently away and need to purchase a rachet and the correct socket for it...

thanks in advance.

ralph · Unread post by **ralph** » 15 Mar 2006, 13:40

Do you mean wheel nut size? All the Cits and Pugs I've had use 19mm wheel nuts.
If you mean the hub nuts which secure the rear drums, they're 32mm.

Plus, if it's wheel nuts, you'll need something meatier than a standard ratchet. Get a breaker bar, you don't have to go mad, 12ins will do. And don't go berserk when tightening them. Wheel nuts are secured at 63lbs/ft, on my two motors.

PowerLee · Unread post by **PowerLee** » 16 Mar 2006, 20:44

If we are talking wheel bolts then

The 106 should have 19mm wheel bolts on.

But it looks like the newer Pugs are different.

My 206 uses 17mm wheel bolts, Same size as a Vauxhall.

abrocky · Unread post by **abrocky** » 16 Mar 2006, 22:47

seems there were a few mistakes in that one! lol

it was a 106, and yeah the hub nut was the size i was after

for anyone needing to know it is 30mm (for the front)

thanks for the responces