2013 DS5 Jerk when put into drive

This is the Forum for all your DS Automobiles Technical Questions, Problems or Advice.
User avatar
GiveMeABreak
(Donor 2016)
Posts: 41989
Joined: 15 Sep 2015, 19:38
x 6958

Re: 2013 DS5 Jerk when put into drive

Unread post by GiveMeABreak »

moizeau wrote: 11 Mar 2020, 17:08 The initial dump of oil just needs to be nice and hot, the temperature is only necessary when setting the level.
The 60°C is required prior to draining to ensure that all the impurities are suspended in the oil when drained - otherwise not much point in changing it Pete :)

@Iansel: You should be fine then - but a good point to keep a note to get it done in future to ensure longevity and good operation of the box Ian. :)
Please note, I'm no longer active on the Forum, so won't respond to messages.

Marc
zipdip
Posts: 81
Joined: 26 Jan 2012, 15:11
x 4

Re: 2013 DS5 Jerk when put into drive

Unread post by zipdip »

Thanks alot guys a very clear discription of how to change the oil,will look to do it next week.

zipdip
2009 C5 1.8 vtr+
Lynnzer
Posts: 122
Joined: 09 Dec 2004, 18:55
x 8

Re: 2013 DS5 Jerk when put into drive

Unread post by Lynnzer »

I had this problem for ages. It was damn annoying just like someone had shunted me from behind.
Then I had it serviced by a local self employed mechanic. He noticed a leak to the gearbox and topped the oil up and all's well since.
M_amoon
New User
Posts: 1
Joined: 09 Jun 2023, 22:24

Re: 2013 DS5 Jerk when put into drive

Unread post by M_amoon »

zipdip wrote: 11 Mar 2020, 20:47 Thanks alot guys a very clear discription of how to change the oil,will look to do it next week.

zipdip
Did you solve the problem?