Ok, so there is a maximum operating temperature of 850 °C and a maximum permissible temperature of 900 °C for both the Upstream and downstream temperature sensors (1343 Downstream & 1344 Upstream on the previous electrical circuit diagram). If you are getting 1271 °C, then the sensor is at fault I suspect.
Again - check the wiring harness for a break / heat damage.
Peugeot Boxer, fault codes and turbopressure
-
GiveMeABreak
- (Donor 2016)
- Posts: 41989
- Joined: 15 Sep 2015, 19:38
- x 6954
Re: Peugeot Boxer, fault codes and turbopressure
Please note, I'm no longer active on the Forum, so won't respond to messages.
Marc
Marc