C5 - Why can't I get my newly installed Cruise to work?

This is the Forum for all your Citroen Technical Questions, Problems or Advice.
wheeler
Posts: 7910
Joined: 21 Sep 2002, 19:07
x 1052

Re: C5 - Why can't I get my newly installed Cruise to work?

Unread post by wheeler »

Yes the changeover is RP 9611. Remember if you check by VIN it will show that a second switch is not fitted as it never left the factory with it, you need switch part no 453437 & the retaining clip 243805. All the details are in my how to guide.
Top
wurlycorner
Donor 2024
Posts: 2177
Joined: 30 Oct 2012, 22:37
x 272

Re: C5 - Why can't I get my newly installed Cruise to work?

Unread post by wurlycorner »

Thanks all for the replies, I needed to fit the extra brake switch, which I picked up from the breakers yard.

It's all as per wheelers guide, with only one note - I used the cruise stalk WITH the limit function and it all works absolutely fine.

All updated in my C5's profile thread here...
--
Iain

'85 CX GTi Turbo s1 (met. blue)
2x '85 CX GTi Turbo s2 t1 (met. silver & grey)
'88 CX GTi Turbo s2 T2 (met. light blue)
CX DTR T2 Safari (silver)
2x '96 Xantia Activa (Black & met. green)
'01 C5 2.0 HDi LX Estate (Blue)
'11 C5 X7 3.0 V6 Exclusive Tourer
Top
wheeler
Posts: 7910
Joined: 21 Sep 2002, 19:07
x 1052

Re: C5 - Why can't I get my newly installed Cruise to work?

Unread post by wheeler »

wurlycorner wrote:Thanks all for the replies, I needed to fit the extra brake switch, which I picked up from the breakers yard.

It's all as per wheelers guide, with only one note - I used the cruise stalk WITH the limit function and it all works absolutely fine.
I have never tried using a mk2 stalk on a mk1 so it's good to know it works.
Top

Return to “Citroën”