Indicators stopped working

This is the Forum for all your Citroen Technical Questions, Problems or Advice.
sandysound
Posts: 31
Joined: 14 Jan 2015, 14:32

Re: Indicators stopped working

Unread post by sandysound »

Hmm since pulling the fuse and putting it back in again, rear wipers work but the relay noise has stopped! I can't hear the click anymore!
sandysound
Posts: 31
Joined: 14 Jan 2015, 14:32

Re: Indicators stopped working

Unread post by sandysound »

I have pulled the steering column apart and disconnected the plugs to the indicator stalk, haz lights don't work then either. Have put it all back together now, I still could not find the illusive indicator relay :-(
citroenxm
Fallen Hero
Posts: 8061
Joined: 30 Dec 2004, 23:10
x 70

Re: Indicators stopped working

Unread post by citroenxm »

:-**
Sharing a pug 207 1.6 hdi Sw 16v.
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project

A very sad...
1994 XM 2.1 d auto
sandysound
Posts: 31
Joined: 14 Jan 2015, 14:32

Re: Indicators stopped working

Unread post by sandysound »

So - I think I have a dodgy connection somewhere...
Today the haz lights and indicators were working again after I wiggled some cables near my feet and wiggled some relays.
Went for a drive, and on the return home it stopped working again.
So I slapped the fuse bay door and voila - working again.
Maybe a dodgy connection or broken wire around the fuse bay?
I haven't been able to pin point it exactly but at least now it seems I can get them going...
citroenxm
Fallen Hero
Posts: 8061
Joined: 30 Dec 2004, 23:10
x 70

Re: Indicators stopped working

Unread post by citroenxm »

Fuse box connections... behind fuse box.. ;-) ....
Sharing a pug 207 1.6 hdi Sw 16v.
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project

A very sad...
1994 XM 2.1 d auto
sandysound
Posts: 31
Joined: 14 Jan 2015, 14:32

Re: Indicators stopped working

Unread post by sandysound »

Good news - I found the relay - it was hard to spot! And... it was loose. Probably after the knock the car took. So after reseating it - so far so good!