Xantia stiff rear suspention

Xaccers · Unread post by **Xaccers** » 14 May 2011, 20:52

Zohar, have you corrected the ride height at all?

lancia58 · Unread post by **lancia58** » 16 May 2011, 04:13

How do I adjust the riding height? Is there a thread describing how to do it ?

Thanks
Zohar

lancia58 · Unread post by **lancia58** » 29 May 2011, 10:09

In one of my previous post at this thread I mentioned that the new rear anti sink sphere was manufactured on 2004 ( the manufacturing date is stamped on it ) I don't know if a sphere has a limited shelf life but I changed it with a new one that was manufactured on 2010 and it did a change, the car rear suspension is less stiff although not as smooth as it the front suspension. I checked if I should add Hydraulic ( LHM ) so I moved the manual height lever to the maximum height position and waited till the car height stabilized the Orange indicator float was above the two red rings. I added LHM and the beginning the Orange float moved down but before it was between the two read rings ( it was slightly above the top read ring ) it started to raise again and I wasn’t able to move it to be between the two red rings. Does anyone know what can be the cause for that

Thanks
Zohar

Xaccers · Unread post by **Xaccers** » 29 May 2011, 10:32

If the float is above the red rings, then you've over filled the lhm tank, which isn't a problem.
You may need to bleed your brakes and do plenty of citrobics.