Fitting alloys to a ZX

James.UK · Unread post by **James.UK** » 05 Jun 2005, 21:36

One small problem you will encounter is the fact that nothing wider than 175 will fit the carriage under the ZX.. [:o)] [8)] ooeerr.. lol.. Dont ask!! [:I]
.

Ross_K · Unread post by **Ross_K** » 05 Jun 2005, 22:14

<blockquote id="quote">quote:<hr height="1" noshade id="quote">One small problem you will encounter is the fact that nothing wider than 175 will fit the carriage under the ZX.. ooeerr.. lol.. Dont ask!!<hr height="1" noshade id="quote"></blockquote id="quote">
What do you mean? The spare tyre carrier? It shouldn't be a problem as I'll have four 175/65s to use as spares.

It's actually still got the original Michelin spare under there, cracked to bits, so that was gonna be getting the heave-ho shortly anyway...

gjb02 · Unread post by **gjb02** » 05 Jun 2005, 22:16

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by James.UK

One small problem you will encounter is the fact that nothing wider than 175 will fit the carriage under the ZX.. [:o)] [8)] ooeerr.. lol.. Dont ask!! [:I]
.
<hr height="1" noshade id="quote"></blockquote id="quote">
I take it you mean the spare wheel carriage??

James.UK · Unread post by **James.UK** » 05 Jun 2005, 23:12

Yes Gareth, the spare wheel carriage.. I can get a 175 in and wound up.. But no way a 185 will wind up using the standard carriage. I supose you could make a new bigger one though if you really had too.. [:D]
.

sooty · Unread post by **sooty** » 06 Jun 2005, 02:24

I don't think a 195/55x15 would be cheaper than 185/60x14, which are more common and as these are going on a 1.9d