My bad. Mirascripts doesn't work so the only thing you can do is to clone the card as you originally asked. Which is exactly what I did before altering the partitions although I didn't keep the copy once I'd proved that the altered partition size worked on the original card.
Again, apologies for losing the plot a bit.
SD Card Clone (Nothing else)
Moderator: GiveMeABreak
-
- Donor 2023
- Posts: 6949
- Joined: 07 May 2009, 16:24
- x 1383
Re: SD Card Clone (Nothing else)
As I get older I think a lot about the hereafter - I go into a room and then wonder what I'm here after.
Inside every old person is a young person wondering what the hell happened.
"Trying is the first step towards failure" ~ Homer J Simpson
Inside every old person is a young person wondering what the hell happened.
"Trying is the first step towards failure" ~ Homer J Simpson
-
- Posts: 18
- Joined: 07 Aug 2023, 21:45
Re: SD Card Clone (Nothing else)
Thank you for your time.
-
- Donor 2023
- Posts: 6949
- Joined: 07 May 2009, 16:24
- x 1383
Re: SD Card Clone (Nothing else)
I hope it was of some help to you.
As I get older I think a lot about the hereafter - I go into a room and then wonder what I'm here after.
Inside every old person is a young person wondering what the hell happened.
"Trying is the first step towards failure" ~ Homer J Simpson
Inside every old person is a young person wondering what the hell happened.
"Trying is the first step towards failure" ~ Homer J Simpson
-
- Posts: 18
- Joined: 07 Aug 2023, 21:45
Re: SD Card Clone (Nothing else)
Yes, thank you.
Too close this out - cloned 3 partitions (in my case). For linux users (1) Disks & (2) GParted to tidy up.
For disassembly read 'https://peugeot-meeting.nl/forum/viewtopic.php?t=11169' & will add that the CD player must be removed for cable access. My thermal paste was more like cement & used a heat gun at sites (finger hot) to remove & again for reassembly. I like also cut a slot with a dremel for SD card later easy removal.
All works good. Thanks to All.
Too close this out - cloned 3 partitions (in my case). For linux users (1) Disks & (2) GParted to tidy up.
For disassembly read 'https://peugeot-meeting.nl/forum/viewtopic.php?t=11169' & will add that the CD player must be removed for cable access. My thermal paste was more like cement & used a heat gun at sites (finger hot) to remove & again for reassembly. I like also cut a slot with a dremel for SD card later easy removal.
All works good. Thanks to All.