Suspension sinks on Sundays! C5 X7 that works hard + 206 GTi HDi (and 406 Coupe and 306 HDi). - MattBLancs

Tell us your ongoing tales and experiences with your French car here. Post pictures of your car here as well.
User avatar
MattBLancs
Donor 2024
Posts: 5308
Joined: 25 Apr 2022, 09:03
x 2339

Re: Suspension sinks on Sundays! C5 X7 that works hard + 206 GTi HDi (and 406 Coupe and 306 HDi). - MattBLancs

Unread post by MattBLancs »

Huskyxantia wrote: 17 Sep 2026, 08:20 How dark is the tint Matt and is it factory fitted or after market stuff some one else fitted ?
After market (think there's a bit of a factory privacy tint too)
Is dark enough you wonder why the car behind has only got side lights on (when in fact they're on dipped beam) - I'll try and take a picture to illustrate what it's like.

Seems there's no legal minimum light transmission value for rear and back passenger windows (unlike windscreen and front side windows)

Hopefully peel off without too much issue. Must be a "red car thing" as the 206 had very dark tints in the back when we first got it too! Peeled off ok, must be 15 years ago, think steamer was involved???
User avatar
MattBLancs
Donor 2024
Posts: 5308
Joined: 25 Apr 2022, 09:03
x 2339

Re: Suspension sinks on Sundays! C5 X7 that works hard + 206 GTi HDi (and 406 Coupe and 306 HDi). - MattBLancs

Unread post by MattBLancs »

Tyre pressure warning in way home last week, pumped up (and reset display) front left at 1.95 bar. Fronts should be 2.5 - 2.7 bar. Rears should be 2.3 - 3.3 bar (wide range!) rest were all a touch under so all topped off.

After much procrastination I'm hoping to pick up a new starter from Euro Car Parts this evening. Lucas branded. I've dug out the (failed solenoid) dead one from the blue 308 SW and that'll be the core charge taken care off - making a new starter with 3 year warranty for about £45.
Euro car parts website descriptions are absolutely pathetic!

Starter details number 1:
Number of Teeth 1
11
Number of Teeth 2
12
Versus number 2:
Teeth
10,11,12,13
Very consistently list "weight" as a defining characteristic! :rofl2:
User avatar
Huskyxantia
(Donor 2025)
Posts: 3876
Joined: 30 Jul 2018, 22:11
x 902

Re: Suspension sinks on Sundays! C5 X7 that works hard + 206 GTi HDi (and 406 Coupe and 306 HDi). - MattBLancs

Unread post by Huskyxantia »

That's why there known as euro car farse
Husky. :? Thinking outside of the box is better than sitting in a dark one.
:-D
User avatar
MattBLancs
Donor 2024
Posts: 5308
Joined: 25 Apr 2022, 09:03
x 2339

Re: Suspension sinks on Sundays! C5 X7 that works hard + 206 GTi HDi (and 406 Coupe and 306 HDi). - MattBLancs

Unread post by MattBLancs »

Indeed, or Euro Wrong Parts...

Red 308 filled up yesterday:
183.9 ppl, £78.86, 42.88 litres = 9.45 gallons
486 miles covered.

51.5 mpg.

Very quick Diagbox session at 6:30 am yesterday before work, seems to think the Audio Amplifier is unhappy. Will put some screen grabs up when I get chance. Code not particularly meaningful
User avatar
CitroJim
A very naughty boy
Posts: 55037
Joined: 30 Apr 2005, 23:33
x 8368

Re: Suspension sinks on Sundays! C5 X7 that works hard + 206 GTi HDi (and 406 Coupe and 306 HDi). - MattBLancs

Unread post by CitroJim »

Huskyxantia wrote: 21 Sep 2026, 07:51 That's why there known as euro car farse
:lol: :lol: Love it!!!
Jim

A bit of a Citroen AX fan...
User avatar
MattBLancs
Donor 2024
Posts: 5308
Joined: 25 Apr 2022, 09:03
x 2339

Re: Suspension sinks on Sundays! C5 X7 that works hard + 206 GTi HDi (and 406 Coupe and 306 HDi). - MattBLancs

Unread post by MattBLancs »

Picture of the dark tint = forgot, will try and remember tomorrow.

Starter swapped today, replacement from Euro Car Parts is compatible, thankfully!
New unit just fractionally less corroded
New unit just fractionally less corroded
Looking closely at the old unit, I was surprised quite how obviously worn it's teeth were! Tip of each a sharp edge:
Worn
Worn
In contrast to the nice radiused teeth of its replacement:
New
New
New unit it 10 teeth, old unit 13 teeth. A quick cardboard template confirming the shaft centre line must be in a different position as the teeth tips are in the same position (measured relative to the two mounting bolt positions either side).
User avatar
Huskyxantia
(Donor 2025)
Posts: 3876
Joined: 30 Jul 2018, 22:11
x 902

Re: Suspension sinks on Sundays! C5 X7 that works hard + 206 GTi HDi (and 406 Coupe and 306 HDi). - MattBLancs

Unread post by Huskyxantia »

Now you can see how the start up sounds lazy and fairly slow when I changed the one in my old zx estate years ago the difference was noticeable
Husky. :? Thinking outside of the box is better than sitting in a dark one.
:-D
User avatar
MattBLancs
Donor 2024
Posts: 5308
Joined: 25 Apr 2022, 09:03
x 2339

Re: Suspension sinks on Sundays! C5 X7 that works hard + 206 GTi HDi (and 406 Coupe and 306 HDi). - MattBLancs

Unread post by MattBLancs »

Huskyxantia wrote: Today, 20:46 Now you can see how the start up sounds lazy and fairly slow when I changed the one in my old zx estate years ago the difference was noticeable
Speed wise it seems pretty similar, but its loads quieter!
Am guessing those worn teeth may be behind the previous noise.
:)


Under tray fighting me to get it in place. New front left arch liner - Autodoc, about £22, is ok, it couldn't be much thinner, but nice and flexible (unlike the brittle original it's replacing).