Citroen, DS Automobiles and Peugeot Official Part Number Requests

[dan g]

Thanks again

[randomandy]

Could I have the part number for the standard wheel bolts for a Peugeot 308 (2010 diesel)? The locking wheel nut key is about to give up on life so I think it is time to swap for regular bolts.

-Andy.

[GiveMeABreak]

The bolts for alloy wheels is part: 9817024580.

However, you could opt for a set of these limpet locking nuts to replace the Peugeot ones. These have no pins that can break off - they use a limpet design and go over the bolt head to remove. They're much more robust. I've used these on my previous X7 after one of my bolts sheared off.

https://www.ebay.co.uk/itm/111365235996 ... SwBslgeEl5

A set of these will be slightly more than 4 standard bolts from Peugeot.

I put some pictures up on my blog here if you want to see how they look:

viewtopic.php?p=659965#p659965

[dan g]

Hi folks

5008 rear trailing arm/axle bushes. Can someone help with part no please.
Thanks
Dan

[GiveMeABreak]

Item (2) Part 374894 £109.21 each inc. VAT

[dan g]

Hi Marc

The bush where the torsion beam axle pivots/ attaches via cradle to the body

[GiveMeABreak]

Item (3) is the Rear Crossmember Flexible Joint for Ref:

Part is / was 5131F2, but if these are unavailable they advise part 9814211880 as a replacement.

5131F2: £44.02 each
9814211880: £42.97 each

Of course, these must be replaced in pairs

[dan g]

Yes item 3.
Thank you

[Cit fan 151]

For the Adriatic wheels with grey inserts, is it possible to get a colour code (or name) for the grey insert?

[GiveMeABreak]

For the Adriatic wheels with grey inserts, is it possible to get a colour code (or name) for the grey insert?

Please see the first post here for parts: viewtopic.php?p=685750#p685750

[DanCD]

Hi Marc,

Can you give me the part number for the valve cover bolts for my Citroen C4 .4 VTi.

Let me know if you need my VIN again.

Cheers,
Dan

[Huskyxantia]

Good morning Marc, another busy one for you, have you a parts diagram of the 2.0hdi xsara picasso gear cables and all fixings ive purchased a new set but one of the plastic gromets had broke ! Its gear stick end.
Many thanks again.

[GiveMeABreak]

Hi Marc,

Can you give me the part number for the valve cover bolts for my Citroen C4 .4 VTi.

Let me know if you need my VIN again.

Cheers,
Dan

Let me know which items from below Dan:

[GiveMeABreak]

Good morning Marc, another busy one for you, have you a parts diagram of the 2.0hdi xsara picasso gear cables and all fixings ive purchased a new set but one of the plastic gromets had broke ! Its gear stick end.
Many thanks again.

Her you go; if you need any part numbers, let me know the item numbers from below:

[Huskyxantia]

No.9 i need that ... fiddly little plastic snappy easy things lol

Thanks marc