Thank you Marc. I didn't mean to be annoying, just didn't know if the post was clear and would be noticed.
This confirms the data for the Sanden model (and is in line with what I had found out before, too). For what I could find out, the Delphi/Harrison V5 (6453 AQ) was also used on this exact model of 406 (and many others) and in fact it's what's installed there right now. The V5 is quite a bit cheaper than the Sanden model (probably it's a little less powerful, as the unit is a bit smaller, but while it had gas it worked well, even with this old, leaking unit), so I'm going for the V5, because although no longer available from Delphi, they are available from lots of aftermarket brands. Thanks for all the support. I'll put a short update here once all will be (hopefully) installed and working successfully.
Peugeot 406 - Help needed identifying correct compressor for A/C
Moderator: RichardW
-
- (Donor 2021)
- Posts: 49
- Joined: 20 Jun 2021, 11:31
- Location: Portugal-Algarve
- My Cars: Peugeot 406 2.1TD Break
- x 9
- GiveMeABreak
- Forum Admin Team
- Posts: 37444
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5742
Re: Peugeot 406 - Help needed identifying correct compressor for A/C
No worries, thanks for understanding and good luck with the replacement.
As you'd expect this is one of those components that will forever be updated as models are improved and older ones discontinued. At least you have several choices now and the compatible model numbers to help you.
If you need any other parts, just shout
As you'd expect this is one of those components that will forever be updated as models are improved and older ones discontinued. At least you have several choices now and the compatible model numbers to help you.
If you need any other parts, just shout
Please Don't PM Me For Technical Help
Marc
Marc
- white exec
- Moderating Team
- Posts: 7445
- Joined: 21 Dec 2015, 12:46
- Location: Sayalonga, Malaga, Spain
- My Cars: 1996 XM 2.5TD Exclusive hatch RHD
1992 BX19D Millesime hatch LHD
previously 1989 BX19RD, 1998 ZX 1.9D auto, 2001 Xantia 1.8i auto
and lots of Rovers before that: 1935 Ten, 1947 Sixteen, 1960 P5 3-litre, 1966 P6 2000, 1972 P6 2000TC, and 1975 P6B 3500S - x 1752
Re: Peugeot 406 - Help needed identifying correct compressor for A/C
On Mister Auto (for example) you should be able to input the original number (6453 TJ), and get an aftermarket match.
When I looked there, all the compressors were actually Sanden, but just badged by different vendors - eg Valeo, Nissens... I went for a Nissens for the BX.
When I looked there, all the compressors were actually Sanden, but just badged by different vendors - eg Valeo, Nissens... I went for a Nissens for the BX.
Chris
-
- (Donor 2021)
- Posts: 49
- Joined: 20 Jun 2021, 11:31
- Location: Portugal-Algarve
- My Cars: Peugeot 406 2.1TD Break
- x 9
Re: Peugeot 406 - Help needed identifying correct compressor for A/C
ThanksGiveMeABreak wrote: ↑22 Jul 2021, 14:11 No worries, thanks for understanding and good luck with the replacement.
As you'd expect this is one of those components that will forever be updated as models are improved and older ones discontinued. At least you have several choices now and the compatible model numbers to help you.
If you need any other parts, just shout
Yes, that's about what I did on several places as I was looking for the OEM number to be able to find the Delphi/Harrison V5 equivalents from aftermarket vendors.white exec wrote: ↑22 Jul 2021, 18:10 On Mister Auto (for example) you should be able to input the original number (6453 TJ), and get an aftermarket match.
When I looked there, all the compressors were actually Sanden, but just badged by different vendors - eg Valeo, Nissens... I went for a Nissens for the BX.
-
- (Donor 2021)
- Posts: 49
- Joined: 20 Jun 2021, 11:31
- Location: Portugal-Algarve
- My Cars: Peugeot 406 2.1TD Break
- x 9
Re: Peugeot 406 - Help needed identifying correct compressor for A/C
Just a quick update for closure. 9 days after changing the compressor for a new Nissens which is compatible substitute for the Delphi/Harrison V5 and having a A/C specialist garage change the dryer filter, vacuum and charge the system, the A/C is still working great, this time it's fixed!
- white exec
- Moderating Team
- Posts: 7445
- Joined: 21 Dec 2015, 12:46
- Location: Sayalonga, Malaga, Spain
- My Cars: 1996 XM 2.5TD Exclusive hatch RHD
1992 BX19D Millesime hatch LHD
previously 1989 BX19RD, 1998 ZX 1.9D auto, 2001 Xantia 1.8i auto
and lots of Rovers before that: 1935 Ten, 1947 Sixteen, 1960 P5 3-litre, 1966 P6 2000, 1972 P6 2000TC, and 1975 P6B 3500S - x 1752
Re: Peugeot 406 - Help needed identifying correct compressor for A/C
Great news. Good to hear it's now working!
Chris
-
- (Donor 2022)
- Posts: 7
- Joined: 24 Jun 2022, 10:46
- Location: Manchester
- My Cars: Peugeot 406 2.0 HDi 110
Re: Peugeot 406 - Help needed identifying correct compressor for A/C
Hi guys,
I think I have exactly the same problem as the OP. The only number I can get off my compressor is 6560502 but this does not bring up matches for parts. If I have understood correctly, if I make a donation to the forum and submit my VIN someone could look up some more useful numbers for me? I would be delighted to do this, please can someone direct me?
Thanks so much
Reuben
I think I have exactly the same problem as the OP. The only number I can get off my compressor is 6560502 but this does not bring up matches for parts. If I have understood correctly, if I make a donation to the forum and submit my VIN someone could look up some more useful numbers for me? I would be delighted to do this, please can someone direct me?
Thanks so much
Reuben
- GiveMeABreak
- Forum Admin Team
- Posts: 37444
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5742
Re: Peugeot 406 - Help needed identifying correct compressor for A/C
Info below:pugpirate wrote: ↑24 Jun 2022, 10:50 Hi guys,
I think I have exactly the same problem as the OP. The only number I can get off my compressor is 6560502 but this does not bring up matches for parts. If I have understood correctly, if I make a donation to the forum and submit my VIN someone could look up some more useful numbers for me? I would be delighted to do this, please can someone direct me?
Thanks so much
Reuben
If you can't already find the info you need on the Forum, we do ask for a membership upgrade for official parts data as we are in turn charged for this. It will cover you for future parts requests for up to 2 years, so excellent value.
If interested, links are below, then pop your VIN up.
A response to your question by a Forum Admin requiring parts or additional information requires you to have made a current contribution (£10 min.) to the Forum. |
To Upgrade Your Membership & Donate Click Here For Further Information About Vehicle Parts and VIN Numbers Click Here |
viewtopic.php?t=69962
Please Don't PM Me For Technical Help
Marc
Marc
-
- (Donor 2022)
- Posts: 7
- Joined: 24 Jun 2022, 10:46
- Location: Manchester
- My Cars: Peugeot 406 2.0 HDi 110
Re: Peugeot 406 - Help needed identifying correct compressor for A/C
Thanks Marc
VF3**************[VIN obfuscated, can be read by forum staff]
VF3**************[VIN obfuscated, can be read by forum staff]
- GiveMeABreak
- Forum Admin Team
- Posts: 37444
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5742
Re: Peugeot 406 - Help needed identifying correct compressor for A/C
No problem, thank you for your Forum donation. Any other part numbers you need, just ask on the Parts thread
Please Don't PM Me For Technical Help
Marc
Marc