Diagbox Software Change Logs (From 6.39/7.06 On)

From French Car Wiki
Jump to: navigation, search

The following tables list the various changes / fixes / improvements made to each specific Diagbox software release

This information has been collated from available sources on the net into a consistent format. There may be some versions where a change log could not be sourced.

Diagbox Version 6.39 / 7.06
Update 6.39 / 7.06 includes new features, in particular:
  • Provision of the side panel (see instructions).
  • BiMarques: double RRDI.
  • Reworking of Update CPA Fault Reading: to make navigation between the Expert mode and the guided mode more fluid, the fault reading on the "Expert" tab will no longer entail restarting of the session in guided mode. The information message "The content of the global test has been modified, the session must be restarted..." no longer appears. NB: The refreshing of the 'Diagnostics' tab after restarting the TG on the 'Expert' tab is normal and necessary.
  • Addition of Romanian among the tool's choice of languages.
  • Associated contexts help EDC17C10: displaying of text specific to the associated variables of a given ECU.
  • Development ADEE DIAG-COM-12-004 Ind E : The ADEE has two functions, local processing of the data memorised by the Spy software and storing of the unprocessed data on a remote PSA server. The local processing permits use of this memorised data and displaying for the technician of one or two possible causes of discharging of the battery. Above all, it make it possible to determine certain causes of discharging of the battery which cannot be reproduced in the workshop or which are no longer present during the diagnostics.
  • Addition of the RT6 Telematic ECU for the Peugeot 807 and Citroën C8 vehicles. » Addition of the RD5 ECU for the Citroën DS5, DS4, C4 II vehicles.
Update 6.39 / 7.06 includes improvements and corrections, in particular: 
706.jpg
DiagBox Version 7.10
  1. Opening of the vehicle points of entry for : 
    - Citroën Berlingo Electric (B9E) 
    - Citroën C4 L (B73R) 
    - Citroën C4 Picasso (B78) 
  2. New features :  - Addition of the V46.21 engine ECU for the Citroën C4L China (B73 China) vehicle  - Addition of Brazil and Argentina for the functionality of a new vehicle  - Addition of the side panel for navigation in DiagBox (see doc attached) 
  3. Incidents corrected :  - Correction of the problem of communication with the EDC17C10_BR2 ECU for the Peugeot Partner and Citroën Berlingo (B9) vehicle  - Correction of the impossibility of manual configuration on the ESP 8.0 ECU for the Citroën C4 (B5) vehicle  - Correction of the diesel additive and PEF personalised maintenance on the SID 807 ECU for the Citroën C4 Picasso (B58) vehicle  - Correction of the programming of the keys on the BSI 2010 ECU for the Citroën DS4 (B75) vehicle  - Correction of the programming of the hands-free identifier on the BSI_2010 ECU for the Citroën DS5 (B81) vehicle  - Correction of the access to the manual configuration menus on the RT6 ECU for the Citroën DS4 (B75) vehicle  - Correction of the impossibility of manual configuration on the BECB ECU for the Citroën C4 (B7) vehicle 
Note: No Corrections Table for V7.10
DiagBox Version 7.16
Update 7.16 includes improvements, notably:
  • Manual resuming of the automatic configuration: displaying of a manual configuration screen when certain parameters could not be configured during the automatic configuration procedure. 
  • Displaying of a screen for viewing the ECU parameters changed during the automatic configuration operation. 
  • Expansion of the field for inputting the user ID in the installation agent. 
  • Distinctions between the two types of C-ELYSEE vehicle. 
  • If the session is closed, the report tab is updated and displays the list of sessions . 

Update 7.16 includes corrections, notably: 

  • Improvement of communication between the Wifi configuration application and the 2310 wifi access point. 
  • Deletion of the "Marque selection" screen on the Diag email for single marque profiles in possession of the multidiag. 
  • Displaying of the global test is now present in the navigation report (trace of use). 
716.jpg
DiagBox Version 7.21 / 7.22
Update 7.21 includes new features, notably:
  • Opening of the point of entry for the Citroën C4 Lounge Mercosur vehicles 
  • Opening of the point of entry for the Citroën DS5 China vehicles 
  • Opening of the point of entry for the Citroën C-Elysée China vehicles 
  • Complete reworking of the vehicle selection portal with new ergonomy and a customisable home page 

Selection of the vehicle is faster and more reliable thanks to new options :

  • Automatic start of the search for the vehicle with 1 click 
  • Vehicle determined by inputting the VIN 
  • Manual selection of the vehicle and filtering of the regularly used vehicles  

Update 7.21 includes improvements and corrections, notably: 

721.jpg
DiagBox Version 7.24
Update 7.24 includes new features, notably :
  • The addition of the DCM6.2 engine ECU for the Peugeot 508, Citroën C4 Picasso and Citroën DS5 vehicles. 
  • A new function which appears during automatic configuration for certain ECUs . Following a successful automatic configuration, a new screen appears displaying the ECU parameter values which were modified during the operation. 
This function is only effective for ECUs which offer the menu « Configuration with displaying of the parameters ». -
724a.jpg
The button «  confirm » allows you to continue the procedure in progress. -
724b.jpg
At the end of the operation, only the parameters which have been modified are displayed. -
724c.jpg
Deactivating the button «  filter » displays all of the ECU's parameters. In this case, the parameters which have been modified are displayed in red and in bold. -
724d.jpg
Update 7.24 includes improvements and corrections, notably:
  • Reworking of the "Oscilloscope Graphics MMI" with optimisation of the screen space of the "reference graphs" and "oscilloscope" functions and improvement of the functions of the oscilloscope function  
  • The MultiDiag Tool category is added in EmailDiag 
  • Improvement of the information banner in EmailDiag for improved visibility and legibility of the messages . 
724.jpg
DiagBox Version 7-27
Update 7.27 includes improvements and corrections, notably:
  • The help messages on the automatic configuration Before/After screen (filter activated/deactivated) are no longer inverted if the parameters are modified. 
  • If the VIN field on the configuration screen is cleared, it is no longer possible to start the configuration of this latter by clicking on the gears. 
  • When configuring the servicing schedule, it is once more possible to move the cursor. 
  • When the oscilloscope signal is paused, the help screen now presents translated sentences and the dictionary can be used. 
  • The "Adaptor MMI" icon on the bottom banner no longer disappears when the cursor is placed over it. 
  • During the test of the recording of faults on the vehicle, the problem of filling of the CPA has been corrected. 
  • In the Expert mode in Russian, the error message no longer appears on attempting to access the Expert mode on a B0 model after having selected the engine ECU. 
  • On the Portal : 

- The automatic detection in Russian no longer stops at the 3rd step. 

- The keyboard short cut linked with the automatic detection works after having clicked on the "Documentation" tab then returned to the "Home" tab. 

- The photos of the vehicle variants appear and change when the cursor is placed over the associated button. 

  • The VIN inputting pop-up contains a "cancel" button . Therefore, the user can go back and is no longer obliged to enter a VIN. 
  • On the Configuration/Parameters/"Service point information" category menu, after having entered the service point information the "E-mail" field is completed with the value entered previously.
727.jpg
DiagBox Version 7-30
Update 7.30 includes new features, notably:
  • Opening of the point of entry for the Citroën Berlingo Electric. 
  • Addition of diagnostics of the Euro6 TI MUX Pump, of the PEF maintenance and of the Diesel Additive System maintenance for the following vehicles : DS3, DS5. 
  • An "End my session" button is added to the supervisor . This ends the vehicle session at any stage of use of the tool with a single click without having to change screen. 

Update 7.30 includes improvements and corrections, notably:

730.jpg
DiagBox Version 7-31
Update 7.31 includes improvements, notably:
  • enlargement of the information banner and of the characters in the messages as well as the addition of a button to display all messages. 
  • integration of the 3 air conditioning assessment charts Chart 208 2008 Europe, charts M3M4 and generic charts. 
  • addition of two technical actions necessary for downloading to the ECU VD46 : Power latch (request to cut off communication with the ECU), Software reset (automatic restarting of the communication with the ECU). 

Update 7.31 includes corrections, notably: 

  • in the VIN input field, the letter "A" is no longer considered a keyboard shortcut. 
  • the display is now adapted to a resolution higher than 1024x768, so preventing the disappearance of the vehicle photos. 
  • the supervisor zone dedicated to the "Thread" messages is no longer reduced and permits viewing of the scrolling of the messages.
731.jpg
DiagBox Version 7-33
Update 7.33 includes corrections, notably:
733.jpg
DiagBox Version 7-34
Update 7.34 includes improvements, notably:
  • Systematic addition of the Faults Log trace in the Emaildiag if the Faults Log is read (Faults Log report box cannot be "unticked"). 
  • Opening in Diagbox of the DS5 LS vehicle point of entry. 
  • Opening in DiagBox of the DV6F engine for the DS5. 
  • Addition of the deactivation/activation of the tyre under-inflation detection on the DS5 China. 

Update 7.34 includes corrections, notably:

  • A correction concerning the installation of the USB Box as an accessory for all vehicles. 
  • A correction concerning the procedure for replacement of the drive machine on hybrid vehicles. 
734.jpg
DiagBox Version 7-35
Update 7.35, available from 03/03/2014, includes modifications to the encapsulated Lexia software, in particular:
  • Opening in DiagBox of the Stolen Vehicle Locating Unit for the Jumper 2.

Note: There is no corrections table in update 7.35.

DiagBox Version 7-36
Update 7.36, available from 12/03/2014, includes improvements, in particular:
  • Addition of an information message before the DiagBox enters into communication with the Jumper 2 vehicle.

Update 7.36, available from 12/03/2014, includes corrections, in particular:

736.jpg
DiagBox Version 7-37
Update 7.37, available from 25/03/2014, includes modifications to the encapsulated Lexia software, in particular:
  • Opening in DiagBox of the Airbag for the Jumper 2 

Update 7.37, available from 25/03/2014, includes corrections of the encapsulated Lexia software, in particular:

737.jpg
DiagBox Version 7-38
Update 7.38, available from 28/03/2014, includes corrections, in particular:
  • Correction concerning the impossibility of opening DiagBox on all vehicles. 

Note: There is no Correction Table supplied in V 7.38. 

DiagBox Version 7-40
Update 7.40, available from 11/04/2014, includes modifications, in particular:
  • Improvement of the visibility of the documentation links icon on the Diagnostics tab 
  • Addition of a message before the automatic start of the global test if the vehicle's IGN+ is not on 
  • Improvement of the access to the side panel 
  • Improvement of the wireless connection. 

Update 7.40, available from 11/04/2014, includes corrections, in particular :

740.jpg
DiagBox Version 7-42
Update 7.42, available from 06/05/2014, includes corrections of the encapsulated Lexia software, in particular:
742.jpg
DiagBox Version 7-43
Update 7.43, available from 16/05/2014, includes modifications, in particular:
  • Opening in Diagbox of the C1 vehicle point of entry. 
  • Opening in Diagbox of the C4 Cactus vehicle point of entry. 

Update 7.43, available from 16/05/2014, includes corrections, in particular:

  • Correction concerning the loading of DiagBox. 
743.jpg
DiagBox Version 7-44
Update 7.44, available from 27/05/2014, includes corrections, in particular:
  • Corrective note concerning key programming from the BSI ECU on Full CAN vehicles

Note: There is no Correction Table supplied in V7.44

DiagBox Version 7-45
Update 7.45, available from 12/06/2014, includes modifications, in particular:
  • update of the diagnostic data for the C1 vehicle. 
  • Update in DiagBox of the Jumper 3 ECUs. 
  • Opening in DiagBox of the EB2F engine for the C3, DS3. 
  • Opening in DiagBox of the EB2DT engine for the C3, DS3. 
  • Opening in DiagBox of the EP6FDT engine for the C4 Picasso. 
  • Change in DiagBox of the ECUs to take into account the urban Emergency Collision Braking System function for C4, C3 Picasso, DS3, Jumpy 3, C8. 
  • update of the post equipment alarm procedure to take into account alarms supplied by Meta and Cobra for all vehicles. 
  • Take into account the keyboard management in the navigation from the "Welcome" tab. 
  • Addition of a message when the user closes the guided procedure without terminating it in the "Diagnostic" tab.  

Update 7.45, available from 12/06/2014, includes corrections, in particular:

745.jpg
DiagBox Version 7-46
Update 7.46, available from 25/06/2014, includes corrections, in particular:
746.jpg
DiagBox Version 7-47
Update 7.47, available from 04/07/2014, includes modifications to the encapsulated Lexia software, in particular:
  • - Airbag diagnostics update for Jumper 2  

Update 7. 47, available from 04/07/2014, includes corrections of the encapsulated Lexia software, in particular:

747.jpg
DiagBox Version 7-49
Update 7.49, available from 10/07/2014, includes modifications, in particular:
  • Opening of the DS6WR point of entry 

Update 7.49, available from 10/07/2014, includes corrections, in particular:  

749.jpg
DiagBox Version 7-50
Update 7.50, available from 27/08/2014, includes corrections of the encapsulated Lexia software, in particular:
750.jpg
DiagBox Version 7-51
Update 7.51, available from 27/08/2014, includes corrections, in particular:
751.jpg
DiagBox Version 7-52
Update 7.52, available from 09/09/2014, includes corrections, in particular:
752.jpg
DiagBox Version 7-53
Update 7.53, available from 23/09/2014, includes corrections, in particular:
  • Correction concerning the error "XUL Runner" when using DiagBox 

Note: There is no Correction Table supplied in V7.53 

DiagBox Version 7-54
Update 7.54, available from 03/10/2014, includes corrections of the encapsulated Lexia software, in particular:
754.jpg
DiagBox Version 7-55
Update 7.55, available from 13/10/2014, includes corrections, in particular:
755.jpg
DiagBox Version 7-56
Update 7.56, available from 21/10/2014, includes corrections, in particular:
  • Correction concerning the access to the "diagnostic procedures" and to the "straight to the faults" to deal with the fault codes on all vehicles. 

Note: There is no Correction Table supplied in V7.56

DiagBox Version 7-57
Update 7.57, available from 30/10/2014, includes corrections of the encapsulated Lexia software, in particular:
  • Correction concerning configuration and downloading for China 
  • Correction concerning accessories (incorrect attributes DDO00 and DDO01) on all vehicles. 

Note: There is no Correction Table supplied in V7.57 

DiagBox Version 7-58
Update 7.58, available from 14/11/2014, includes modifications, in particular:
  • Opening in Diagbox of the M44C vehicle point of entry 
  • Modification of the error message CH002 during an engine ECU download on all vehicles 
  • Addition of the "Test by ECU" function 

Update 7.58, available from 14/11/2014, includes corrections, in particular: 

  • Correction concerning the automatic detection by VIN on Jumper 3
758.jpg
DiagBox Version 7-60
Update 7.60, available from 04/12/2014, includes corrections, in particular:
  • correction concerning errors under LEXIA during downloading or automatic configuration following update 7.58 
  • correction concerning the missing documentation tab following update 7.58 
  • correction concerning the EmailDiag application not working following update 7.58 

Note: There is no Correction Table supplied in V7.60 

DiagBox Version 7.61
Update 7.61, available from 15/12/2014, includes modifications, in particular:
  • Addition of information messages for the C3-XR, C4, DS4, DS 5LS, DS 6, L60 vehicles before the start of the global test 

Update 7.61, available from 15/12/2014, includes corrections, in particular:

761.jpg
DiagBox Version 7.62
Update 7.62, available from 13/01/2015, includes modifications, in particular:
  • Integration of the DAP-2310 WiFi terminal with firmware 1.16 
  • integration of the DAP-2310 WiFi terminal type B1 
  • deletion of the "sensitive part validation request" box in the EmailDiag 

Update 7.62, available from 13/01/2015, includes corrections, in particular:

762.jpg
DiagBox Version 7.63
Update 7.63, available from 11/02/2015, includes modifications, in particular:
  • Addition of engine ECU ME17.9.52 to C1 
  • Addition of engine ECU MM6KP to C4L 

Update 7.63, available from 11/02/2015, includes corrections, in particular:

  • Correction concerning the Apache error when sending an EmailDiag
763.jpg
DiagBox Version 7.64
Update 7.64, available from 20/02/2015, includes corrections, in particular:
  • Correction concerning the impossibility of accessing the diagnostic procedures ► Error message on the DiagBox Diagnostic tab 
  • Correction concerning the reporting of the error R27 

Note: There is no Correction Table supplied in V7.64 

DiagBox Version 7.65
Update 7.65, available from 10/03/2015, includes corrections, in particular:
765.jpg
DiagBox Version 7.66
Update 7.66, available from 10/03/2015, includes corrections, in particular: (Note that both tables for V7.65 & V7.66 are intentionally the same)
766.jpg
DiagBox Version 7.67
Update 7.67, available from 10/04/2015, includes corrections of the encapsulated Lexia software, in particular:
767.jpg
DiagBox Version 7.68
Update 7.68, available from 17/04/2015, includes corrections, in particular:
768.jpg
DiagBox Version 7.69
Update 7.69, available from 20/04/2015, includes corrections, in particular:
  • Correction concerning the customer mode forcing line displayed in red during a New Vehicle Preparation operation on several vehicles. 

Note: There is no Correction Table supplied in V7.69 

DiagBox Version 7.72 / 8.08
Update 7.72 / 8.08, available from 01/06/2015, includes corrections, in particular:
772 808.jpg
DiagBox Version 7.74 (8-10)
Update 8.10, available from 02/07/2015, includes modifications, in particular:
  • Addition of Argentinian Spanish, Brazilian Portuguese and Korean 

Update 8.10, available from 02/07/2015, includes corrections, in particular:

774 810.jpg
DiagBox Version 7.75 (8.11)
Update 8.11, available from 07/07/2015, includes corrections of the encapsulated Lexia software, in particular:
811.jpg
DiagBox Version 7.76 (8.12)
Update 8.12, available from 07/07/2015, includes modifications, in particular:
  • Addition of a function displaying a message on terminals which are overdue for a refresh 
  • Addition of a function preventing installation of the Windows 10 upgrade 

Update 8.12, available from 07/07/2015, includes corrections, in particular: 

812.jpg
DiagBox Version 8.13

Update 8.13, available from 26/08/2015, includes modifications, in particular :

  • Taking into account of the DAP 2360 WIFI terminal specific to Japan
  • Addition of 6 sub-categories to the vehicle assistance request in the EmailDiag application
DiagBox symptom corrected ECU concerned Vehicle affected
Correction concerning the pressure checking operation BVA AM6 UDS C4 Picasso
Correction concerning the parameter measurements PADDGO_INERGY All vehicles
Correction concerning the access to the repair or expert menus Parking Assistance UDS C4 Cactus, DS5 and DS6
Correction concerning the sending in EmailDiag of the parameter measurement reports All ECUs All vehicles
Correction concerning the manual configuration RD45 DS 5LS
DiagBox Version 8.14

Update 8.14, available from 08/09/2015, includes corrections, in particular

DiagBox symptom corrected ECU concerned Vehicle affected
Correction concerning the Email Diag attachments management warning message
Correction concerning the actuator test "Check of the NOx system flow" DCM 6.2 All vehicles
Correction concerning the "Belt replacement" command DCM 6.2 C4 Picasso
Correction concerning the configuration of a new servicing schedule Instrument panel ECU C4 Aircross
DiagBox Version 8.15

Update 8.15, available from 07/10/2015, includes corrections, in particular

DiagBox symptom corrected ECU concerned Vehicle affected
Correction concerning the missing translations for Chinese
Correction concerning the key on/off automatic detection in the menus DCM 6.2 Jumper 3 Euro 5
Correction concerning the parameter measurements in Remote Diagnostics LADCT C4 and DS4
Correction concerning the configuration values SMEG / SMEG+ All vehicles
Correction concerning the manual configuration BCC C4 Cactus
DiagBox Version 8.16

Update 8.16, available from 25/11/2015, includes corrections of the encapsulated Lexia software, in particular

DiagBox symptom corrected ECU concerned Vehicle affected
Correction concerning the error GDI when downloading MM6LPB C5 R
Correction concerning the error GDI when reading the JDD BSI C5 R
Correction concerning the fan assembly manual configuration EDC15C2 Jumper 2