C2 speed signal wire for cruise control

[wheeler]

Sorry guys, i was in a rush when i wrote this morning, the wire number is actually 6738 not 6387(listed a vehicle speed signal) it comes from pin 24 of the ABS ecu, The connector & pin numbers were correct.

[ozvtr]

LOL! That's the "strange wire" coming out of the ABS module that I mentioned before.

[Cav91]

LOL! That's the "strange wire" coming out of the ABS module that I mentioned before.

And it's nice an easy to get too. Might even be able to install aftermarket cruise without running wires through the firewall.

I did get the chance to prob this wire, and do get a reading that changes with speed. So I'll wire up the rest of the kit and see if it works.

[Cav91]

Well.... today I spent a couple of hours on it. Soldered it all in wired up to the throttle pedal. Hooked into that speed sensor wire. And boom it works. I have working aftermarket cruise control in my sensodrive c2. Thanks for all everyone help.

[wheeler]

Did you tap into the speed pulse at the connector above the BSI?

[Cav91]

Did you tap into the speed pulse at the connector above the BSI?

Yes, that wire you said, did exactly what you said it should! Thanks heaps!