Hi have a pug 307 1.6 hdi 07
Put battery back on and alarm kept going off. Remote only works after inserting key into door and unlocking .
Remote works fine after this car locks unlocks on the fob
Once the BCU goes to sleep it won't wake .up. problem started after I used an Audi
Key fob to unlock by pressing remote .
It did go through a phase when it went back to normal but stopped again .
Do I need a BCU ?
BCU won't wake up by remote
Moderators: RichardW, myglaren
-
OnlineGiveMeABreak
- Forum Admin Team
- Posts: 37445
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5742
Re: BCU won't wake up by remote
If you remove or disconnect the battery you need to properly reinitialise the fobs or you'll have issues with the immobiliser / locking.
BSI Reset / Battery Disconnect / Reconnect Procedure
BSI Reset / Battery Disconnect / Reconnect Procedure
Please Don't PM Me For Technical Help
Marc
Marc