Citroen, DS Automobiles and Peugeot Official Part Number Requests

[Rhothgar]

This is for your VIN ending 785, so bear in mind it's an exploded diagram.

Yes. That’s the correct VIN. Architect by qualification so do appreciate the exploded diagram hence my concern why it looks nothing like what is on the car!

Cheers anyway Marc. Totally bamboozled.

[GiveMeABreak]

It won't be the first time!

[xantia_v6]

The gaiter fits over a ring that is part of the strut top mount:

[Rhothgar]

The gaiter fits over a ring that is part of the strut top mount:

Oh dear! Then it seems that black rubber down stand on the mount has totally failed!!!!

How do Kingas ones match the originals. Are they exact would you happen to know?

[Huskyxantia]

Ok
Wheel Hub Bearing
if Item (4) which is (B + (14)), which is the Front Hub Bearing, then part 1606623580 (£118.51)
Cheaper PSA alternative Part No: 1623948880 @ £41.60



Engine Mount

Item (4) part no: 180944 @ £51.02



If anything else, let me know Colin.

What model would this cover ? Reason i ask , ive done 2 bearings on my 206cc 1.6hdi both have failed
Might be fake parts having a issue at the mo with ebay seller, whats the correct torque setting for the main hub nut im seeing on the net 96nm up to 350nm, ive got a slight vibration when slowing down not brakes either there all new.

[GiveMeABreak]

Diagrams and part numbers are only relevant to the specific vehicle in the original post and it's not practical for me to go back on old posts.

As you're a donating member, just ask for your own part numbers. Tell me what it is you want part numbers for here and make sure you pop your VIN up for the 206.

[Huskyxantia]

Front wheel hub bearing torque setting vin. VF3**************[VIN obfuscated, can be read by forum staff]

[Huskyxantia]

Hi, its the front hub nut torque im after. 36MM Nut , very conflicting on the net about the torque

[GiveMeABreak]

Here you go:

The Wheel Hub (2) is part: 330785

The Hub Bearing (3) is
OEM Original: 335016 £144.01
Peugeot Approved Cheaper alternative: 1681934780 £27.23

Prices as of today from Peugeot inc. VAT.

The Driveshaft Nut is (M24X150) 32.5 da.Nm

[Huskyxantia]

Thanks marc

Have you anythimg about the rear hub ? Mine has the magnetic ring with bearing fitted all in one part numbers and the torque of the bearing hub nut too, dont think mine are tight enough on the rear.

The Driveshaft Nut is (M24X150) 32.5 da.Nm

[GiveMeABreak]

Here's the torque settings for the rear suspension

Reference	Designation	daNm
(1)	Rear flexible mounting to body fastening	11
(2)	Front flexible mounting to body fastening	11
(3)	Torsion bar (Face and threads greased )	2.0
(4)	Rear shock absorber fastening to yoke (Face and threads greased )	7.0
(5)	Rear shock absorber fastening to arm	15
(6)	Rear hub fastener (Face and threads greased )	20
(7)	Anti-roll bar lever bolt	3.5

[Huskyxantia]

Brilliant .Thank you

[Orchid70]

Hi Marc

Im looking for correct FAP fluid for refill. VIN VF7**************[VIN obfuscated, can be read by forum staff]
Thank you!

[GiveMeABreak]

Hi Marc

Im looking for correct FAP fluid for refill. VIN VF7**************[VIN obfuscated, can be read by forum staff]
Thank you!

With a build date of 12510 you need Eolys EXTEND for the C5 X7.

[randomandy]

Hello!

On my 2007 Peugeot 207 (1.6HDi 9HX) the ABS light on the dashboard illuminates every time the car is started. Having a poke around with the PP2000 it reports:

Permanent fault. Right-hand rear wheel sensor signal fault. Open circuit or short circuit to positive or short circuit to earth.

Could one of you kind folks provide me with the correct part number for the replacement?

-Andy.