Citroen, DS Automobiles and Peugeot Official Part Number Requests

[moizeau]

More of a parts diagram request than a number so I can work out where an E clip goes please.

After knocking the windscreen spindle out and cleaning it I have this E clip left over. There is only 1 recess in the spindle and I was sure the C clip that retains the washer (that retains the O ring) uses it (photo). I remember taking it out but can't remember where from, maybe the recess but if so where does the C clip go?
This is the van Marc. Doing my head in now.
Cheers

Edit, Can't use the other side as a reference as that was dismantled to prove that the spingle comes out without removing the motor and all the gubbins

[GiveMeABreak]

Here Pete, there are washers referred to at (2) and captive washers at (71) & (73), but can't see the clip unless it is (2).....

[mickthemaverick]

Hope I'm not butting in but I'd suggest that the e clip may come from one of the rod joints I have circled in red here:

Modified parts diag.

[GiveMeABreak]

Looks good to me Mick

[moizeau]

No Mick, they clip on and off. The diagram that Marc has put up is slightly different to mine. The spindle comes up through it's support then there's an O ring, then a flat washer, then a C clip. Guessing it must be part of an assembly.
Thanks for the diagram Marc, though non the wiser

[Huskyxantia]

Many thanks Marc , & you have just settled a niggle ive always had with conversions to solid.

[508c5]

Hi,

Can i have the OE part number for the catalytic converter of a Citroen Picasso C4 with a VIN number - VF7**************[VIN obfuscated, can be read by forum staff]

THX

[Huskyxantia]

(10) Dual Mass Flywheel, Diam 291 131 DTS OEM Valeo (Embray), part: 0532T2. £697.39.

Hi marc, is there any other DMF numbers at all as im not having much luck at all ,i did find a solid one on ebay, but the bolt holes for the plate cover were not as many .. only 2 plus the seller is being very weird , scammer sort of weird. If theres any of nunbers that cross ref , id be greatful for you help.
Thanks.

[508c5]

(10) Dual Mass Flywheel, Diam 291 131 DTS OEM Valeo (Embray), part: 0532T2. £697.39.

Hi marc, is there any other DMF numbers at all as im not having much luck at all ,i did find a solid one on ebay, but the bolt holes for the plate cover were not as many .. only 2 plus the seller is being very weird , scammer sort of weird. If theres any of nunbers that cross ref , id be greatful for you help.
Thanks.

try Bart-Ebben of the Netherlands

[GiveMeABreak]

Autodoc have one listed here:
2 options here: https://www.autodoc.co.uk/car-parts/oem/0532t2
Amazon:
https://www.amazon.co.uk/Flywheel-Citro ... B0DBJ6T2Q2

[GORAX]

Hello everyone,

I need the part number for a differential pressure sensor on my dpf.

VF7**************[VIN obfuscated, can be read by forum staff]

[GiveMeABreak]

Hi,

Can i have the OE part number for the catalytic converter of a Citroen Picasso C4 with a VIN number - VF7**************[VIN obfuscated, can be read by forum staff]

THX

(10) Catalytic Converter, part: 9803403380, £1444.79

[GiveMeABreak]

Hello everyone,

I need the part number for a differential pressure sensor on my dpf.

VF7**************[VIN obfuscated, can be read by forum staff]

(1) Differential Pressure Sensor, part: 1618Z9, £120.20

[Huskyxantia]

VF7**************[VIN obfuscated, can be read by forum staff] oil pump part number requied please Marc
Many thanks.

[stickery74]

Thanks Marc, I am struggling to source one of these in any condition.