Citroen C5 2010 Suspension Faulty

This is the Forum for all your Citroen Technical Questions, Problems or Advice.

Moderator: RichardW

Ezmir
Posts: 12
Joined: 22 Jun 2020, 20:02

Re: Citroen C5 2010 Suspension Faulty

Unread post by Ezmir »

I did messarue the voltage to the pump and i disnt got anything there 0VDC

User avatar
EDC5
Donor 2020
Posts: 1186
Joined: 01 Jul 2017, 21:48
x 95

Re: Citroen C5 2010 Suspension Faulty

Unread post by EDC5 »

So you say the fuse has not blown buy you don't have 12v at the pump?

Ezmir
Posts: 12
Joined: 22 Jun 2020, 20:02

Re: Citroen C5 2010 Suspension Faulty

Unread post by Ezmir »

yes, the fuse is okay.
Maybe it can be a relay?

User avatar
osx
Posts: 564
Joined: 08 Jun 2013, 20:09
x 5

Re: Citroen C5 2010 Suspension Faulty

Unread post by osx »

So is it the only the front that is low?

Ezmir
Posts: 12
Joined: 22 Jun 2020, 20:02

Re: Citroen C5 2010 Suspension Faulty

Unread post by Ezmir »

No.. the whole car..

lcwin
Posts: 27
Joined: 12 Oct 2015, 15:41
x 2

Re: Citroen C5 2010 Suspension Faulty

Unread post by lcwin »

Ezmir, measure the voltage at the pump fuse. One end should have 12v the other end also the same. If its 0 v then fuse problem.
If both is 12v then measure at the pump connector and see if you got 12v. if you get 0 v here probably the power transistor or the relay is faulty. Here you can cut the positive wire to pump and connect a 12v to the pump and see if pump runs. the pump have a thin wire thats enable the pump i think its 12v but cannot remember. You can check the voltage of the thin wire before doing anything to see if the enable signal is there.
Citroen and peugeots generally have bad fuse connections and electrical connector . A fuse could be good but the contacts usually loosen and oxidise with age. It is the number 1 reason why they have a bad reputation in the reliability scores.

Ezmir
Posts: 12
Joined: 22 Jun 2020, 20:02

Re: Citroen C5 2010 Suspension Faulty

Unread post by Ezmir »

I did and i got DC trough the fuses.
There is one fuse F13 and also i found G39 which is also to the pump.
Booth of them are ok.
I want to found what starts the pump.
Where is the relay located ?

Ezmir
Posts: 12
Joined: 22 Jun 2020, 20:02

Re: Citroen C5 2010 Suspension Faulty

Unread post by Ezmir »

here are the cables i messarue.
Attachments
2D70C9FD-FCBE-4B48-A485-1535C919C6EC.jpeg
CF5DE34E-ABF0-4F2A-A83E-F0E13AFEB035.jpeg
38DFE858-078C-4F0B-A5C3-7DA5F7B43FDE.jpeg

lcwin
Posts: 27
Joined: 12 Oct 2015, 15:41
x 2

Re: Citroen C5 2010 Suspension Faulty

Unread post by lcwin »

Ezmir, from your last pix beside the main 2 pin plug that powers the motor, on the right is a pin thats enable the motor.I can,t remember but likely it needs 12v to enable the motor power. You can power up the motor directly this way independent of the computer control by supplying 12v to the main connector and a 12v to the pin on the right
I got a feeling your BSI part which control the power to pump motor is faulty, I never open it up before so I can,t help.