
Xantia A/C
Moderator: RichardW
-
- Moderating Team
- Posts: 7489
- Joined: 21 Dec 2015, 13:46
- x 1467
Re: Xantia A/C

-
- Donor 2021
- Posts: 2467
- Joined: 24 May 2007, 10:11
- x 320
Re: Xantia A/C
Yes them both working as intended was my main priority, now need to think about the A/C but think i may get the aux belt etc changed before i go for a regas as i know the compressor kicks in when doing the bridge trick
Colin
Colin
-
- Donor 2022
- Posts: 9183
- Joined: 11 May 2019, 17:56
- x 2487
Re: Xantia A/C
Well done Colin, cracked it in the end!! Now fingers crossed for the AC.!! 

-
- Donor 2021
- Posts: 2467
- Joined: 24 May 2007, 10:11
- x 320
Re: Xantia A/C
Well another kicking from the blinkin motors again today 
Everything fine yesterday, this morning only the r/h would work and only on fast when pulling the blue stat plug, nothing from the l/h one.
So replaced all relays to start with, no change.
Back to the tool box and Jim's special tool to remove the offending motor and check the power to the plug on the housing and yes 12v present when engine running and blower on and direction set to demist.
Put a direct feed from the battery to the offending motor and nothing apart from a nasty smell.
Back through my stash of old motors to find one that did want to show some life and try again.
Everything working again as it should so fingers crossed tomorrow morning it will still be working as it should.
Colin

Everything fine yesterday, this morning only the r/h would work and only on fast when pulling the blue stat plug, nothing from the l/h one.
So replaced all relays to start with, no change.

Back to the tool box and Jim's special tool to remove the offending motor and check the power to the plug on the housing and yes 12v present when engine running and blower on and direction set to demist.
Put a direct feed from the battery to the offending motor and nothing apart from a nasty smell.
Back through my stash of old motors to find one that did want to show some life and try again.
Everything working again as it should so fingers crossed tomorrow morning it will still be working as it should.

Colin