xsara picasso 03 -plate

This is the Forum for all your Citroen Technical Questions, Problems or Advice.

Moderator: RichardW

picassodad
Posts: 207
Joined: 04 Oct 2018, 14:26
x 9

Re: xsara picasso 03 -plate

Post by picassodad »

Fantastic, the car was all good yesterday, no report back for today yet, but here's hoping.

Printing off the last stuff now, thank you thank you thank you.

306 clutch cable, not had a phone call to say its arrived yet, grrrrrrrr, oh and the third problem, the kitchen roof leaked again last night, what a year its been.
picassodad
Posts: 207
Joined: 04 Oct 2018, 14:26
x 9

Re: xsara picasso 03 -plate

Post by picassodad »

Interestingly part number 10 on the fuel tank view looks just like an inertia/collision switch ? at the back?? by the tank ???
User avatar
GiveMeABreak
Forum Admin Team
Posts: 25505
Joined: 15 Sep 2015, 19:38
x 2855

Re: xsara picasso 03 -plate

Post by GiveMeABreak »

Yes that's the one - number 10 in this Diagram, referred to in parts as a contact switch.
Picasso Dad Fuel Pump.PNG
picassodad
Posts: 207
Joined: 04 Oct 2018, 14:26
x 9

Re: xsara picasso 03 -plate

Post by picassodad »

P1010010.JPG
The picasso seems to be behaving its self and I am due to see it saturday night/sunday for the oil change and fuel filter, and hopefully the under bonnet earths. The pug clutch cable arrived yesterday so with the help of the wife ( I have trained her well and do exactly as she says ) winched it up under the car port. The under bonnet stuff was removed and the car will be in the air this afternoon. Then the fun begins with the pedal end!
wheeler
Posts: 5182
Joined: 21 Sep 2002, 19:07
x 305

Re: xsara picasso 03 -plate

Post by wheeler »

GiveMeABreak wrote:
17 Dec 2018, 22:42
Its a 2002 model and doesn't have stalk mounted controls.

:-k Must me an old late registered model. 2002 was the changeover year. If its not a com2000 model then it should have a separate double relay and an inertia switch, inertia switch should be mounted on one of the strut turrets.