Checked on the parts diagram with parts dept. in my local peugeot dealer while I was in picking up some nuts and dust shields for the C5 today...
No circlip shown/listed.
Surprising to me, but there you go!
Citroen C5 driveshaft seals
Moderator: RichardW
-
- Posts: 1366
- Joined: 30 Oct 2012, 22:37
- Location: Chelmsford, Essex
- My Cars: Two C5's...
Lots of CXs...
A couple of Xantia...
A C2...
Lots of Prelude's...
And a Sunny! - x 66
- Contact:
Re: Citroen C5 driveshaft seals
--
Iain
1x '85 CX GTi Turbo s1 (metallic blue)
2x '85 CX GTi Turbo s2 t1 (metallic silver & grey)
'88 CX GTi Turbo s2 T2 (metallic light blue)
CX DTR T2 Safari (silver)
2x '96 Xantia Activa (Black & metallic green)
'01 C5 2.0 HDi LX Estate (Blue)
Iain
1x '85 CX GTi Turbo s1 (metallic blue)
2x '85 CX GTi Turbo s2 t1 (metallic silver & grey)
'88 CX GTi Turbo s2 T2 (metallic light blue)
CX DTR T2 Safari (silver)
2x '96 Xantia Activa (Black & metallic green)
'01 C5 2.0 HDi LX Estate (Blue)
-
- Posts: 70
- Joined: 06 Jan 2014, 18:34
- Location: Romania
- My Cars:
- x 4
Re: Citroen C5 driveshaft seals
Dear colleagues, I was trying to find a post in regards to the axel shaft sealing for automatic gearbox Aisin AM6, but not successfully. May I ask if somebody of you has the procedure of axle shaft sealing replacement, for the left one (short axle shaft)? I have replaced the sealing 6 months ago and after a few days I have observed oil back leaking on the gearbox housing, under the shaft. I need to mention that I have pressed that new sealing as the old one was.
So last Friday I have replaced the sealing again and pressed the sealing more - maybe too much, that's why I need to check for leakage. I can attach a photo of the old sealing and the new one (red). Many thanks.
So last Friday I have replaced the sealing again and pressed the sealing more - maybe too much, that's why I need to check for leakage. I can attach a photo of the old sealing and the new one (red). Many thanks.