could somone have a look at this for us

This is the Forum for all your Citroen Technical Questions, Problems or Advice.

Moderator: RichardW

Northern_Mike

Re: could somone have a look at this for us

Post by Northern_Mike »

jacksun1987 wrote:Mine 1.9td is around 30 pound a week for 200 miles 40 miles aday.
You need an HDi. Even my C5 only costs me £25 for 5 days of that journey. I've got 55mpg out of it driving sensibly.
Peter.N.
Moderating Team
Posts: 11574
Joined: 02 Apr 2005, 16:11
Location: Charmouth,Dorset
My Cars: Currently:

C5 X7 VTR + Satnav Hdi estate Silver
C5 X7 VTR + Hdi Estate 2008 Red

In the past: 3, CX td Safaris and about 7, XM td estates. Lovely cars.
x 1204

Re: could somone have a look at this for us

Post by Peter.N. »

citroenxm wrote:Not sure Peter, if Citroen sorted the head gasket issues by the time the 2,1 got to the Xantia.

Ive a feeling they had switched to Laminated gaskets by then... but I could be wrong though.
You could well be right Paul, my experience of 2.1s has only been with the XM.

Peter
jacksun1987
Posts: 450
Joined: 03 Sep 2009, 18:47
Location:
My Cars:
x 1

Re: could somone have a look at this for us

Post by jacksun1987 »

So the 2.1 tds could have problerms
Peter.N.
Moderating Team
Posts: 11574
Joined: 02 Apr 2005, 16:11
Location: Charmouth,Dorset
My Cars: Currently:

C5 X7 VTR + Satnav Hdi estate Silver
C5 X7 VTR + Hdi Estate 2008 Red

In the past: 3, CX td Safaris and about 7, XM td estates. Lovely cars.
x 1204

Re: could somone have a look at this for us

Post by Peter.N. »

Its possible but its no more likely to than a 1.9, they blow gaskets as well at about the same mileage. As Pauls says, if they used laminated steel gaskets on them they could well last longer. The Hdi engine uses the laminated gasket and I have one that has done 216,000 miles without needing a replacement.

Peter
citroenxm
Posts: 8061
Joined: 30 Dec 2004, 23:10
Location: Somewhere in North Wales, Anglesey
My Cars: M reg Xm S2 2.1td Auto Exclusive. 269k and rising
L reg XM S1 V6 12v Manual SEi
L 94 XM 2.1 TD auto total resto

2008 Peugeot 207 Sw 1.6 16v hdi. 217k and rising
2010 Peugeot 207 SW 1.6 8v HDi 161k and rising
x 71

Re: could somone have a look at this for us

Post by citroenxm »

Peter.N. wrote:Its possible but its no more likely to than a 1.9, they blow gaskets as well at about the same mileage. As Pauls says, if they used laminated steel gaskets on them they could well last longer. The Hdi engine uses the laminated gasket and I have one that has done 216,000 miles without needing a replacement.

Peter

Ive got a HDi with 261k on original gasket and no leaks... Once any XUD got a laminated gasket they never went again.
Sharing a pug 207 1.6 hdi Sw 16v.
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project

A very sad...
1994 XM 2.1 d auto
Post Reply