PM sent
Today I have been able to run Embedded XP's interface inside the lexia and add USB support for keyboard, removable drive and hub (hub is needed for usb mouse+keyboard+drive with only one usb port).
PS: I post message regularly, so if someone gets in trouble with his lexia2, he could maybe find information in this post.
Lexia2 & Diag2000
Moderator: RichardW
Re: Lexia2 & Diag2000
did you get hold on some of the images of these cd's? Looking for them as well. I need the update cd's from cd33 and up... hope someone can help me out with iso's from them.
-
- Posts: 1
- Joined: 20 Oct 2019, 17:21
- Location: Tongeren
- My Cars: Citroën BX14 1993 (KDY) currently driving - on LPG
Citroën BX16TRS 1990 crashed at only 160000 km - on LPG
Citroën 14RE (K1G) 1990 put aside after 709000 km - on LPG
Citroën 2CV6 1978 converted to LPG
Citroën 14RE 1989 - on LPG
Renault 16TL 1978 - on LPG
Citroën Dyane 6
Renault 16TX
Re: Lexia2 & Diag2000
Are you still working with your Lexia2? I was given one without the CD's and it does the exact same thing Cranor's - the IHMWIN error on CW3215.dll.
I'm wondering how you connected a PS2 keyboard to it? Through the RS232 port? and also how you were able to make your own lan and USB cable? Do you have any documentation on that? I tried connecting a USB keyboard via a PCMCIA USB card, but that didn't work. Is there anything you need to do to activate the PCMCIA connection? For the moment, my Lexia sticks on a grey page that says "please wait" (in Dutch)...
I'm aware you last post was in 2012, but maybe...
I'm wondering how you connected a PS2 keyboard to it? Through the RS232 port? and also how you were able to make your own lan and USB cable? Do you have any documentation on that? I tried connecting a USB keyboard via a PCMCIA USB card, but that didn't work. Is there anything you need to do to activate the PCMCIA connection? For the moment, my Lexia sticks on a grey page that says "please wait" (in Dutch)...
I'm aware you last post was in 2012, but maybe...
- GiveMeABreak
- Forum Admin Team
- Posts: 37005
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5646
Re: Lexia2 & Diag2000
Cranor was last active April 2017, so may pick up your post if he is still subscribed to the thread.
Please Don't PM Me For Technical Help
Marc
Marc
Re: Lexia2 & Diag2000
Good evening, could you tell me how you got into Windows XP and how you made the usb connection? Thank you.
- GiveMeABreak
- Forum Admin Team
- Posts: 37005
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5646
Re: Lexia2 & Diag2000
Not quite sure I understand your question. The USB drivers are installed once the VCI is connected to the laptop.
Please Don't PM Me For Technical Help
Marc
Marc
Re: Lexia2 & Diag2000
Remember this thread is referring to Lexia 2.
I think they are asking how to get into the windows system as it automatically switches onto Lexia.
The VCI is integrated into the device, the lead that plugs into the car is just a bunch of wires unless you have the later additional lead for full CAN vehicles, this has a little interface on it.
I think they are asking how to get into the windows system as it automatically switches onto Lexia.
The VCI is integrated into the device, the lead that plugs into the car is just a bunch of wires unless you have the later additional lead for full CAN vehicles, this has a little interface on it.
- GiveMeABreak
- Forum Admin Team
- Posts: 37005
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5646
Re: Lexia2 & Diag2000
Of course, I didn't read back to the beginning of the thread.
Please Don't PM Me For Technical Help
Marc
Marc
Re: Lexia2 & Diag2000
If I remember right Citrojim done some modifying of an old Lexia 2 unit a few years back?
- xantia_v6
- Forum Admin Team
- Posts: 9053
- Joined: 09 Nov 2005, 22:03
- Location: France or NewZealand
- Lexia Available: Yes
- My Cars: -
1997 Citroen Xantia V6 (France)
1999 Citroen XM V6 ES9 (France)
2011 Peugeot 308 CC THP 155 (NZ)
1975 Jaguar XJ-S pre-HE (NZ) - x 825
Re: Lexia2 & Diag2000
My recollection is that Jim never managed to make it work due to the Lexia 2 using some non standard I/O devices (or bios) and the Lexia software would not run on standard PC hardware.