vsx suspension issues

KevMayer · Post by **KevMayer** » 22 Oct 2008, 19:43

Damn...do you think I should have insulated it ?

I have a memory of reading somewhere that the suspension will stay in soft mode at speeds below around 25 mph. So, if you ride over the speed hump slowly you shouldn't get such a bump because you'll not encourage the switch to hard.

Mandrake · Post by **Mandrake** » 24 Oct 2008, 00:53

Xac wrote:
KevMayer wrote:Here's a pic of the diodes I added to my Activa to overcome the non operational electrovalve problems.
Kev
Electrical insulation not really your thing?

How about this ?

8)

Regards,
Simon

Xaccers · Post by **Xaccers** » 24 Oct 2008, 03:14

What's stopping the bare legs of the diodes from touching each other though?

pete_wood_uk · Post by **pete_wood_uk** » 24 Oct 2008, 08:29

One hopes that Simon wrapped each of them individually before wrapping as a bundle...

KevMayer · Post by **KevMayer** » 24 Oct 2008, 20:47

I must apologise to you all. I was really only joking. I can assure you that the diodes in my picture were thoroughly insulated from one another before I plugged everything back together. Copious amount of insulating tape interwound between the connections.

I took the picture of the 'naked' diodes just for my own records.

Xaccers · Post by **Xaccers** » 26 Oct 2008, 12:03

KevMayer wrote:I must apologise to you all. I was really only joking. I can assure you that the diodes in my picture were thoroughly insulated from one another before I plugged everything back together. Copious amount of insulating tape interwound between the connections.

I took the picture of the 'naked' diodes just for my own records.

You rotter

Mandrake · Post by **Mandrake** » 27 Oct 2008, 01:40

pete_wood_uk wrote:One hopes that Simon wrapped each of them individually before wrapping as a bundle...

Of course

Regards,
Simon

mustican05 · Post by **mustican05** » 17 Feb 2017, 12:42

KevMayer wrote:Here's a pic of the diodes I added to my Activa to overcome the non operational electrovalve problems.

Kev

Hello
Did the diodes work? Why did you use the diodes? Finally, what is the model of the diodes? please help me. I want my flying carpet back

SM-N9000Q cihazımdan Tapatalk kullanılarak gönderildi

French Car Forum

vsx suspension issues

Re: RE: