xantia brake control valve

This is the Forum for all your Citroen Technical Questions, Problems or Advice.

Moderator: RichardW

Post Reply
User avatar
ukmobileman
Posts: 113
Joined: 22 Dec 2001, 21:52
Location: United Kingdom
My Cars:
Contact:

xantia brake control valve

Post by ukmobileman »

my brake control valve on my xantia is loose ( i guess it should be secure!)it also leaks!! i am going to replace with new but how is it held on? ( haynes manual is somewhat vague!!)are the bolts undone from inside (under dash/near pedals) or do they undo from engine compartment? i haven't looked at it closely yet!
RichardW
Forum Treasurer
Posts: 10814
Joined: 07 Aug 2002, 17:12
Location: United Kingdom
My Cars: MK2 '17 C4GP 1.6 BlueHDi 120
'13 3008 1.6 HDi GripControl
x 984

Post by RichardW »

AFAIK the brake valve is bolted on from inside. Leak may just be a pipe union that needs tightening up - I had this on my BX when it failed an MOT - especially if the valve itself is loose - try tightning it up, and nipping up the unions to see if this cures the leak.
Richard
Aubrey Smith
Posts: 7
Joined: 26 Jun 2002, 17:28
Location: United Kingdom
My Cars:

Post by Aubrey Smith »

Hi
I had the same problem on my 94d Xantia.I found the bubber cover had split on the push rod. Which is part of the brake control valve in side the car. Also the nuts which holds the brake valve are behind the brake pedal.You can buy a repair kit.
Post Reply