Hi,
Could someone tell me what size Torx bit I need to undo the cylinder head bolts on a 1991 BX GTi.
Also - are they readily available or am I likely to have to specially order it?
Thanks,
Martin.
BX - Tool for cylinder head removal
Moderator: RichardW
-
- Posts: 7
- Joined: 13 May 2002, 17:06
- Location: United Kingdom
- My Cars:
-
- Posts: 1915
- Joined: 14 May 2001, 05:30
- Location: United Kingdom
- My Cars:
- x 2
Hi, T55 if I'm not mistaken, but you ought to have a full set anyway, they are available all over the shop, my advice would be to buy a set with 1/2" square drives so they can be used with a socket set.
I recently bought a Torx bit set by Sealey, had to send it back because it was pure crap, suggest you don't bother with them.
You may have a branch of http://www.cromwell-tools.co.uk near you, they do some good clobber, click on contacts for locations.
Dave
I recently bought a Torx bit set by Sealey, had to send it back because it was pure crap, suggest you don't bother with them.
You may have a branch of http://www.cromwell-tools.co.uk near you, they do some good clobber, click on contacts for locations.
Dave