xm clutch cable

This is the Forum for all your Citroen Technical Questions, Problems or Advice.

Moderator: RichardW

Post Reply
jimbo
Posts: 19
Joined: 02 Aug 2001, 17:21
Location: United Kingdom
My Cars:

xm clutch cable

Post by jimbo »

How difficult is it to change the cable on a 91 xm 2.0 si petrol
and can andyspares supply the cable.
Zummerman
Posts: 20
Joined: 18 Apr 2002, 21:51
Location: United Kingdom
My Cars:

Post by Zummerman »

Hi Jimbo,
Fiddly, but not difficult. The Haynes manual gave me almost enough clues. I assume that your cable is the self-adjusting type. If so you'll need to use something appropriate to jam the cable outer in position in the frame that holds the bellcrank (where it comes out of the bulkhead) so that you can extend the cable to locate it in the lever at the bellhousing end. I think I used a square screwdriver between the cable outer and cable end. Small hands and a little imagination are helpful in fitting the cable to the pedal...
Good luck!
Post Reply