ZX front suspension strut mounting split

This is the Forum for all your Citroen Technical Questions, Problems or Advice.

Moderator: RichardW

Post Reply
Firelite
Posts: 1
Joined: 10 Nov 2001, 21:57
Location: United Kingdom
My Cars:

ZX front suspension strut mounting split

Post by Firelite »

Hi,
I was giving my ZX 1.9 TD a check over today and noticed the front nearside suspension mount point under the bonnet has two splits. There are two splits in the metal work each running from a suspension strut mounting bolt to the cut out where the top of the suspension pokes through.
Does anybody know why this occurred? and is it an MOT failure.
Thanks
Andy
Dave Burns
Posts: 1915
Joined: 14 May 2001, 05:30
Location: United Kingdom
My Cars:
x 2

Post by Dave Burns »

Hi, noticed today that my n/s mounting is also split from the cut out to the rear bolt hole, going by the amount of rust round it it's been there for some time, car was tested in late August, bloke was strict but did'nt mention it, think he would have failed it if he'd seen it though.
Dave
Post Reply