Hello there
Peugeot 508 2017 GT version... Car was parked outside for two weeks. Temperature below 0 to -6
Middle touch screen was warm to touch when after driving 30 minutes I have notice the smudge in the middle.
Everything is visible only you can see there is some smudge when sun shining.
After car is off see the picture?
Dying Smeg+ LCD
Moderator: GiveMeABreak
-
MattSVK
- Posts: 12
- Joined: 06 Jul 2023, 20:09
- Location: Slovakia
- My Cars: Peugeot 508 - 2017 - 133kw GT
- x 3
Dying Smeg+ LCD
- Attachments
-
- Second picture after 20 minutes car turned off
-
- First picture
-
OnlineGiveMeABreak
- Forum Admin Team
- Posts: 37446
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5742
Re: Dying Smeg+ LCD
What is the display like when the screen is active - for example displaying data? Are there any missing patches with the screen active?
Please Don't PM Me For Technical Help
Marc
Marc
-
MattSVK
- Posts: 12
- Joined: 06 Jul 2023, 20:09
- Location: Slovakia
- My Cars: Peugeot 508 - 2017 - 133kw GT
- x 3
Re: Dying Smeg+ LCD
When the screen is active then there is no problem apart from the smudge. Touchpad is also working fine...
-
Paul-R
- Donor 2023
- Posts: 6949
- Joined: 07 May 2009, 16:24
- Location: Wirral, NW England; Vaucluse 84, France
- Lexia Available: Yes
- My Cars: 2015 1.6 Blue HDi 120 Peugeot 308 Active SW
2013 2.0 HDi 163 C5 Exclusive Tourer
2003 2.0 HDi 110 C5 Exclusive Estate (Gone)
2001 2.0 HDi 90 Xsara Estate (Gone) - x 1383
Re: Dying Smeg+ LCD
We had something that looked similar on our 308 a few years ago. It was pre-Covid so probably 2019. I thought it was condensation and just left it. It cleared up after a while and hasn't come back since.
As I get older I think a lot about the hereafter - I go into a room and then wonder what I'm here after.
Inside every old person is a young person wondering what the hell happened.
"Trying is the first step towards failure" ~ Homer J Simpson
Inside every old person is a young person wondering what the hell happened.
"Trying is the first step towards failure" ~ Homer J Simpson
-
MattSVK
- Posts: 12
- Joined: 06 Jul 2023, 20:09
- Location: Slovakia
- My Cars: Peugeot 508 - 2017 - 133kw GT
- x 3
Re: Dying Smeg+ LCD
Yeah... At the moment the car is parked outside again and I am not going to use it till 12 December. I will post later on the result.
-
MattSVK
- Posts: 12
- Joined: 06 Jul 2023, 20:09
- Location: Slovakia
- My Cars: Peugeot 508 - 2017 - 133kw GT
- x 3
Re: Dying Smeg+ LCD
Hello again...
All right after work 2 weeks the car was parked outside. From the cold start I though that it is fixed but it did appeared again after 30 minutes driving. But I had like couple of hours drive in front of me so after 60 minutes from cold start it was getting smaller. Probably 2 hours it was gone.
Since then it did not came back. Strange...
All right after work 2 weeks the car was parked outside. From the cold start I though that it is fixed but it did appeared again after 30 minutes driving. But I had like couple of hours drive in front of me so after 60 minutes from cold start it was getting smaller. Probably 2 hours it was gone.
Since then it did not came back. Strange...