Manufacturer of floor panels? Citroen Relay 1996
Moderator: RichardW
-
- (Donor 2020)
- Posts: 14
- Joined: 20 Jun 2020, 21:29
- Location: Walsall, West Midlands
- My Cars: Citroen Relay High Cube Box Van 1996
Manufacturer of floor panels? Citroen Relay 1996
I have a 1996 Citroën Relay 2.5 diesel medium chassis type 18 cab with a rusty panel which needs replacing. Having just manufactured a Shogun rear arch out of sheet metal, I don't want to have to do anything like that again. Ever. It's underneath the van and has a small rubber grommet in it. It is drivers side just to the left of the step section. The sill looks fine, so I am hoping to be able to cut this section out and replace it with a new underbody plate/panel. Is there anyone the collective has found that presses these parts, or has them for sale? Or someone who can make one? I can get a photo or two if you need to see where I mean because this body looks like it is shortened and has a Luton type box on the back. Thank you for any help as this will fail the MOT I would think.
-
- (Donor 2020)
- Posts: 7224
- Joined: 08 Jun 2011, 18:04
- Location: GL15***
- My Cars: 2006 C5 2.0 Litre HDI VTR Automatic Estate.(now sold on)
Currently Renault Zoe 2014 ZE - x 2521
Re: Manufacturer of floor panels? Citroen Relay 1996
This was my go to place when I was trading.
http://www.middletonpanelsandpaint.co.uk/home/404202
http://www.middletonpanelsandpaint.co.uk/home/404202
Man is, by nature, a lazy beast, he does not need twice encouraging to do nothing.
-
- (Donor 2020)
- Posts: 14
- Joined: 20 Jun 2020, 21:29
- Location: Walsall, West Midlands
- My Cars: Citroen Relay High Cube Box Van 1996
Re: Manufacturer of floor panels? Citroen Relay 1996
Thank you for your help! Very much appreciated.