So I've got a 2010 Peugeot 308 T7 and the A/C stopped working. The compressor doesn't kick in. The system must be full of refrigerant because I had it serviced two weeks ago and there are no visible signs of leaks (the a/c oil has a UV dye in it but I couldn't identify any leaks).
I noticed the following very peculiar live data:
The car has a two-zone AC control. So I find it very implausible that the sensors are dead on both sides. There are no further DTCs.
Could this be a reason for the compressor to not kick in?
Where are these sensors physically located?
Thanks in advance
PS.: I have also uploaded the live data from the BSI - would be grateful for any troubleshooting tips.
Peugeot 308SW T7 - are these sensor values normal?
Moderator: RichardW
-
- Forum Treasurer
- Posts: 10901
- Joined: 07 Aug 2002, 17:12
- Location: United Kingdom
- My Cars: MK2 '17 C4GP 1.6 BlueHDi 120
'13 3008 1.6 HDi GripControl - x 1003
Re: Peugeot 308SW T7 - are these sensor values normal?
Looks like the low pressure switch is activated. Either there's not enough gas in it, it the switch is faulty.
Richard W
Re: Peugeot 308SW T7 - are these sensor values normal?
Thank you for the insight. I must've missed the "low pressure safety". However, as if missing the line in the live data wasn't embarrassing enough, I can't seem to locate a sensor on the low pressure line. There is one 3-wire-sensor on the thinner line but this must be the high pressure switch. So where should I look for the low pressure sensor and is there one at all? There is nothing on the condenser as well. The car is a 2010 Peugeot 308 2.0 HDI.