Hello all
So I've bought RD45 replacement for the old RD4 to support BT music and phone in my Grand Picasso C4 2013.
I was able to configure the radio to work well (added the VIN to the radio using Lexia).
However, i can't see any option to enable the screen for adding Bluetooth menu.... as far as I know, I have screen type c and it should support but I can't find the option to do so in Lexia (I've gone line by line of any components and didn't find it...)
can someone guide me where it should be?
Attached pic of my display
Thanks !!
Configuring RD45 via Lexia
Moderator: GiveMeABreak
- GiveMeABreak
- Forum Admin Team
- Posts: 37014
- Joined: 15 Sep 2015, 19:38
- Location: West Wales
- My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow - x 5648
Re: Configuring RD45 via Lexia
I'll need your VIN as the C4 Picassos have different options
Please Don't PM Me For Technical Help
Marc
Marc
- EDC5
- (Donor 2020)
- Posts: 1216
- Joined: 01 Jul 2017, 21:48
- Location: N. Wales
- My Cars: Citroen C5 RHR AM6
- x 120
Re: Configuring RD45 via Lexia
From what I gathered when I did the same upgrade, I had to make sure the software version of the new screen was at least v.70
I've never seen a screen in the Picasso, but it appears to be a EMF-C embedded in a gauge cluster. If the EMF-C is still accessible separately in Lexia, then you will need to activate the handsfree options ,amongst others, to match the feature set of the RD45.
I've never seen a screen in the Picasso, but it appears to be a EMF-C embedded in a gauge cluster. If the EMF-C is still accessible separately in Lexia, then you will need to activate the handsfree options ,amongst others, to match the feature set of the RD45.
Re: Configuring RD45 via Lexia
Same problem here...
Maybe the counter has one of the first software Sw 7.1.
New versions are 8.1 and 9.3 (2009-2010)
7.1 shouldn't have bluetooth and hands free icons.
Jaguarr did you have find a solution with lexia?
Ciao from Italy
Dario
Maybe the counter has one of the first software Sw 7.1.
New versions are 8.1 and 9.3 (2009-2010)
7.1 shouldn't have bluetooth and hands free icons.
Jaguarr did you have find a solution with lexia?
Ciao from Italy
Dario
- xantia_v6
- Forum Admin Team
- Posts: 9053
- Joined: 09 Nov 2005, 22:03
- Location: France or NewZealand
- Lexia Available: Yes
- My Cars: -
1997 Citroen Xantia V6 (France)
1999 Citroen XM V6 ES9 (France)
2011 Peugeot 308 CC THP 155 (NZ)
1975 Jaguar XJ-S pre-HE (NZ) - x 825
Re: Configuring RD45 via Lexia
If I remember correctly, on the 308 you need to also enable bluetooth hands-free (either in the BSI or screen configuration, I dont remember which) as if the earlier Nomad hands-free was fitted, so that the bluetooth screen display was enabled.