306 clutches

This is the Forum for all your Peugeot Technical Questions, Problems or Advice.

Moderator: RichardW

Post Reply
bad driver
Posts: 207
Joined: 27 Jun 2003, 01:03
Location: United Kingdom
My Cars:

306 clutches

Post by bad driver »

I currently have a 306 td with a n/a derv gearbox and clutch / flywheel etc.
I want to put the td flywheel back on and use a td clutch as its bigger, I know one clutch is push and one is pull. Is this just the way the cable pulls? IE will the thrust bearing still be pressed toward the clutch when pedal is pressed and will the td thrust bearing fit the n/a arm?
Thanks
Dave Burns
Posts: 1915
Joined: 14 May 2001, 05:30
Location: United Kingdom
My Cars:
x 2

Post by Dave Burns »

Push or pull refers to the action of the release bearing on the pressure plate diaphragm spring, none of the parts are interchangeable.
Dave
PowerLee
Posts: 1260
Joined: 01 May 2004, 19:49
Location: United Kingdom
My Cars: Current - Slightly modified 2016 Pug 308 Puretech 130 Allure
Past:
2003 - 206 GLX TU3JP & 206 SE ET3JP4
1995 - 405 Executive XU10J2
1996 - 406 GLX XU10J4R
1994 - 405 GTX XU10J2
x 1

Post by PowerLee »

Isnt the clutch cable different too between Pull & Push types?
Post Reply