405,1.9 GRI AUTO ENGINE PINKING

This is the Forum for all your Peugeot Technical Questions, Problems or Advice.

Moderator: RichardW

Post Reply
T.RUSSELL
Posts: 2
Joined: 06 Jul 2004, 20:15
Location:
My Cars:

405,1.9 GRI AUTO ENGINE PINKING

Post by T.RUSSELL »

DOES ANYONE KNOW WHY MY 405 SHOULD SUDDENLY START PINKING ON LIGHT THROTTLE? EMISSIONS FOR MOT ARE SPOT ON, PLUGS ARE RIGHT COLOUR, WHERE THE HELL IS THE ANTI-KNOCK SENSOR 'COS THE PUG GARAGE DON'T KNOW. DON'T BOTHER SUGGESTING I BACK OFF THE TIMING 'COS THERE AIN'T NO DIZZY. EXPERIENCED SUGGESTIONS PLEASE, TA.
PowerLee
Posts: 1260
Joined: 01 May 2004, 19:49
Location: United Kingdom
My Cars: Current - Slightly modified 2016 Pug 308 Puretech 130 Allure
Past:
2003 - 206 GLX TU3JP & 206 SE ET3JP4
1995 - 405 Executive XU10J2
1996 - 406 GLX XU10J4R
1994 - 405 GTX XU10J2
x 1

Post by PowerLee »

A faulty knock sensor should have triggered the fault light on the dash & a Pug garage SHOULD know where the sensor is,
Its screwed into the block, Down the front, aboult half way down, in the middle, You cant really miss it.
T.RUSSELL
Posts: 2
Joined: 06 Jul 2004, 20:15
Location:
My Cars:

Post by T.RUSSELL »

CHEERS FOR THAT, POWERLEE.
ITS A BIT CRAMPED UNDER THE FI MANIFOLD BUT I'LL HAVE A DIG ROUND.O/MANUAL SUGGESTS ITS ON THE BACK WHICH IS WHY I'M STRUGGLING.
PowerLee
Posts: 1260
Joined: 01 May 2004, 19:49
Location: United Kingdom
My Cars: Current - Slightly modified 2016 Pug 308 Puretech 130 Allure
Past:
2003 - 206 GLX TU3JP & 206 SE ET3JP4
1995 - 405 Executive XU10J2
1996 - 406 GLX XU10J4R
1994 - 405 GTX XU10J2
x 1

Post by PowerLee »

I never knew the 1.9 8 valve had a knock sensor fitted to it myself.
what year is the pug then?
Post Reply