Hi there,
Hope sombody can help me on this one.
All the dials on the Pug suddenly stopped working last week. I have checked all the usual suspects, fuses, shunts, connectors etc.
tried all the easy fixes, wiggle the connector, disconnect the battery, replug the intruemnt cluster.
Cluster warnign lamps and mile counter all work fine!
Any help gratfully received.
Thx
Col.
306 Dash instruments died.
Moderator: RichardW
-
- Posts: 1260
- Joined: 01 May 2004, 19:49
- Location: United Kingdom
- My Cars: Current - Slightly modified 2016 Pug 308 Puretech 130 Allure
Past:
2003 - 206 GLX TU3JP & 206 SE ET3JP4
1995 - 405 Executive XU10J2
1996 - 406 GLX XU10J4R
1994 - 405 GTX XU10J2 - x 1
Hi
To re-boot the dash board.
1) Find the fuse box inside the car & locate the Black & Red shunt with SH in White letters printed on it.
2) Start the engine & let it idle.
3) Remove the shunt for at least 10 seconds & then replace it.
4) Gauges should go to maximum for a few seconds, then return to normal.
To re-boot the dash board.
1) Find the fuse box inside the car & locate the Black & Red shunt with SH in White letters printed on it.
2) Start the engine & let it idle.
3) Remove the shunt for at least 10 seconds & then replace it.
4) Gauges should go to maximum for a few seconds, then return to normal.