806 rear door removel

This is the Forum for all your Peugeot Technical Questions, Problems or Advice.

Moderator: RichardW

Post Reply
Bxtzdkyle
Posts: 3
Joined: 28 Aug 2018, 19:02
Location: Barnsley
My Cars: 306 x2
Saxo
Bx tzd
806

806 rear door removel

Post by Bxtzdkyle »

Looking to change both sliding doors for un dented ones. Anyone give a step by step of how to remove? Thanks
Top
User avatar
GiveMeABreak
Forum Admin Team
Posts: 37396
Joined: 15 Sep 2015, 19:38
Location: West Wales
My Cars: C3 Aircross SUV HDi Flair Peperoncino Red (The Chili Hornet)
C5 X7 2.0 HDi Exclusive Mativoire Beige (The Golden Hornet)
C3 1.6 HDi Exclusive Aluminium Grey (The Silver Hornet)
C5 MK II 2.0 HDi Exclusive Obsidian Black
C5 MK I 2.0 HDi SX Wicked Red
Xantia S2 2.0 HDi SX Hermes Red
C15 Romahome White
XM 2.0 Turbo Prestige Emerald Green Pearlescent
XM 2.0 Turbo Prestige Polar White
XM 2.0 SX Polar White
CX 20 Polar White
GS 1220 Geranium Red
CX 2.4 Prestige C-Matic Nevada Beige
GS 1000 Cedreat Yellow
x 5739

Re: 806 rear door removel

Post by GiveMeABreak »

Here you go.

You'll need one of these:
806 Sliding DoorC.PNG
Door Support Tool
Removing
  • Lower the glass approximately two thirds of its travel.
  • Protect the rear wing.
  • Support the door on the stands [1].
806 Sliding Door A.PNG
806 Sliding Door B.PNG
Remove:
  • The fixing (1)
  • The stop (2)
  • The trim (3)
  • The mountings (4) (Take the weight of the sliding door)
  • Remove the mountings (5) - (6) (Take the weight of the sliding door).
  • Detach the bottom runner assembly.
  • Remove the sliding door (Two operators are necessary)
.
Refitting

Proceed in the reverse order to removal.
  • Carry out operating test.
  • Check the clearance.
  • Tighten the fastener ( 1) to 1 daN.m..
  • Tighten the fixings ( 4) to 1 mdaN.
  • Tighten the fixings ( 5) - (6) to 2.4 mdaN.
Please Don't PM Me For Technical Help

Marc
Top
Post Reply

Return to “Peugeot”