406 Cluster a LED or Bulb and noise on clutch.

This is the Forum for all your Peugeot Technical Questions, Problems or Advice.

Moderator: RichardW

Post Reply
fv43576
Posts: 77
Joined: 11 Aug 2015, 15:48
Location:
My Cars:
x 3

406 Cluster a LED or Bulb and noise on clutch.

Post by fv43576 »

My wife Peugeot 406 saloon HDI 90bhp Rapier 2003, the cluster on the left side is dark, I think the bulb has fused but on the Youtube it shows how to remove the cluster it shows have LED. I am confused is my wife have LED or Bulb??? if it is LED then I am in a big trouble will to buy the whole cluster because the LED is non-replacement.

Another problem is the clutch start to making noise like screeching metal is rub when release the clutch the car is fine drive normally on all gears no slip & go up the hill fine. I want to eliminate the problem do this have a solid flywheel? I know the sound of DMF when fail, could be the clutch release bearing worn? I know my old 306 2.0HDI 90 did have solid flywheel which is same engine on 406 can anyone help me?

thanks
RichardW
Forum Treasurer
Posts: 10814
Joined: 07 Aug 2002, 17:12
Location: United Kingdom
My Cars: MK2 '17 C4GP 1.6 BlueHDi 120
'13 3008 1.6 HDi GripControl
x 984

Re: 406 Cluster a LED or Bulb and noise on clutch.

Post by RichardW »

Very unlikely a 2003 car has an LED cluster; I expect it's a normal bulb.

Screeching when the clutch is pressed is most likely the release bearing; a 2003 90 BHP will be a sold flywheel, pretty sure.
Richard W
fv43576
Posts: 77
Joined: 11 Aug 2015, 15:48
Location:
My Cars:
x 3

Re: 406 Cluster a LED or Bulb and noise on clutch.

Post by fv43576 »

RichardW thanks :thumb:
Post Reply