Worn ignition lock replacement... 4 wires not 6 - SOLVED.

This is the Forum for all your Peugeot Technical Questions, Problems or Advice.

Moderator: RichardW

Mervyn44
Posts: 36
Joined: 23 Apr 2017, 19:41
Location: Belfast
My Cars: 2007 Citroen C4 Picasso 1.6 Hdi
x 4

Re: Worn ignition lock replacement... 4 wires not 6 - SOLVED.

Post by Mervyn44 »

Thanks Pete,

Yes... for anyone having worn ignition lock/barrel problems on the 306, and probably whole host of other models (this seems to have been a common fitment on loads of cars (PSA and other marques) for many years). If the actual barrel is the same then the six wire/3 connector (which is most common on ebay and cheap to buy as of 2017) will do the job. the wiring colours are the same so if you have the 4 wire/2 connector variety just hook up colour to colour, leave the 3rd connector free and job done.

- Merv.
Post Reply