Pug Problems

This is the Forum for all your Peugeot Technical Questions, Problems or Advice.

Moderator: RichardW

Planko87
Posts: 9
Joined: 03 Dec 2016, 00:17
Location: Portadown
My Cars: 04 Peugeot 407 2.0 HDI
x 1

Re: Pug Problems

Post by Planko87 »

So it was the DPF in then end. Got it programmed out of the brain and she hasn't had any issues since

Sent from my A0001 using Tapatalk
User avatar
Paul-R
Donor 2023
Posts: 6931
Joined: 07 May 2009, 16:24
Location: Wirral, NW England; Vaucluse 84, France
Lexia Available: Yes
My Cars: 2015 1.6 Blue HDi 120 Peugeot 308 Active SW
2013 2.0 HDi 163 C5 Exclusive Tourer
2003 2.0 HDi 110 C5 Exclusive Estate (Gone)
2001 2.0 HDi 90 Xsara Estate (Gone)
x 1378

Re: Pug Problems

Post by Paul-R »

Presumably you had the DPF gutted as well (or at least drilled through) as this would still be problem otherwise.

I hope that you haven't had the DPF physically removed as it will be an MOT fail if it's not present visually.

And then there's the moral and social aspect about bypassing an environmental protection device. I'm sure that quite a few people here will let you know their opinions on that!
As I get older I think a lot about the hereafter - I go into a room and then wonder what I'm here after.

Inside every old person is a young person wondering what the hell happened.

"Trying is the first step towards failure" ~ Homer J Simpson​
puddlethumper
Posts: 36
Joined: 09 Jul 2012, 17:25
Location: Stourbridge
My Cars: Peugeot 305 van
x 6

Re: Pug Problems

Post by puddlethumper »

I have a 305 van and after hitting a bloody pothole I've got a problem with the front nearside wheel assembly. Under breaking I get a terrible vibration. I swapped the wheel. No difference. Swapped the disc. No difference. New flange, ooer. No difference. I don't know what else it can be. Any ideas welcome ,as its pissing me right off.
mickeymoon

Re: RE: Re: Pug Problems

Post by mickeymoon »

puddlethumper wrote:I have a 305 van and after hitting a bloody pothole I've got a problem with the front nearside wheel assembly. Under breaking I get a terrible vibration. I swapped the wheel. No difference. Swapped the disc. No difference. New flange, ooer. No difference. I don't know what else it can be. Any ideas welcome ,as its pissing me right off.
Sounds like a damaged lower arm fixing or bush.

Sent from my SM-G925F using Tapatalk
puddlethumper
Posts: 36
Joined: 09 Jul 2012, 17:25
Location: Stourbridge
My Cars: Peugeot 305 van
x 6

Re: Pug Problems

Post by puddlethumper »

Cheers Mickeymoon. Will look into that. Potholes, grrrrr!
Post Reply