Recently have had my intercooler replaced which was about 2 months ago now. Although I am now getting further engine codes coming up which are as follows:
P0299
P0100
P1351
P3008
What could be causing this?
Any advise welcome!
307 1.6HDi fault codes
Moderator: RichardW
307 1.6HDi fault codes
Hi All,
Recently have had my intercooler replaced which was about 2 months ago now. Although I am now getting further engine codes coming up which are as follows:
P0299
P0100
P1351
P3008
What could be causing this?
Any advise welcome!
Recently have had my intercooler replaced which was about 2 months ago now. Although I am now getting further engine codes coming up which are as follows:
P0299
P0100
P1351
P3008
What could be causing this?
Any advise welcome!
-
bangerdemon
- Posts: 2
- Joined: 22 Mar 2015, 13:29
- Location:
- My Cars:
Re: 307 1.6HDi fault codes
P0299 - Charge pressure regulation : Air pressure below the reference value
P0100 - Air flow measure : Quantity of air above the maximum threshold
P1351 - Pre-heating relay circuit : Coherence ; Relay supplied and glow plugs not supplied
P3008 - Air circuit : Air flow higher than recommended
I would say you have an air leak or blockage somewhere, but could be wrong!!!
Bangers
P0100 - Air flow measure : Quantity of air above the maximum threshold
P1351 - Pre-heating relay circuit : Coherence ; Relay supplied and glow plugs not supplied
P3008 - Air circuit : Air flow higher than recommended
I would say you have an air leak or blockage somewhere, but could be wrong!!!
Bangers
-
Gibbo_Wirral
- Posts: 183
- Joined: 17 Jul 2013, 14:34
- Location: Formby, West Lancs.
- My Cars: Peugeot 206 Sport 2L HDI
- Contact:
Re: 307 1.6HDi fault codes
All pretty common codes, a Google should give you links to threads where similar faults have happened. Always read live data though before blindly changing parts - P0100 could lead you to fitting a new MAF, but it could be a bad connection.
Peugeot Planet Diagnostics: Wirral, Merseyside, Lancashire, Cheshire, North Wales