I thought the XUD's (certainly the earlier ones say up to about 1998) just had a solid simple pulley as on the 205 its only driving the alternator.
I *do* see where you're going though with the suggestion and I could well be wrong.
PUG 205 GRD Severe Engine Vibration
Moderator: RichardW
- spider
- Posts: 3949
- Joined: 05 Jan 2010, 14:28
- Location: Derby.
- My Cars: Soon, I hope...
- x 77
- Contact:
Re: PUG 205 GRD Severe Engine Vibration
Andy.
91 205D-Turbo, gone but still missed
02 106D, TUD5B, gone but not really missed apart from the MPG
91 205D-Turbo, gone but still missed
02 106D, TUD5B, gone but not really missed apart from the MPG
-
- Moderating Team
- Posts: 11574
- Joined: 02 Apr 2005, 16:11
- Location: Charmouth,Dorset
- My Cars: Currently:
C5 X7 VTR + Satnav Hdi estate Silver
C5 X7 VTR + Hdi Estate 2008 Red
In the past: 3, CX td Safaris and about 7, XM td estates. Lovely cars. - x 1204
Re: PUG 205 GRD Severe Engine Vibration
I hadn't really given that a thought as most of the ones I have had were dual mass. I hope I'm not wrong.
Peter
Peter
-
- Posts: 8
- Joined: 25 Oct 2022, 19:58
- Location: Scotland
- My Cars: Peugeot 205 diesel.
- x 1
Re: PUG 205 GRD Severe Engine Vibration
Hello, I have a 1990 205 GRD 235000 Miles, recently I have a severe vibration coming from the engine. It is there when ticking over and worse when you rev the engine. I've replaced N/S drives haft, all engine all mountings and crank pulley. Engine is running sweet as a nut no unusual noises and starts on the button. I've had this car since it was 6 months old and always serviced. Anyone had this problem?
-
- Moderating Team
- Posts: 11574
- Joined: 02 Apr 2005, 16:11
- Location: Charmouth,Dorset
- My Cars: Currently:
C5 X7 VTR + Satnav Hdi estate Silver
C5 X7 VTR + Hdi Estate 2008 Red
In the past: 3, CX td Safaris and about 7, XM td estates. Lovely cars. - x 1204
Re: PUG 205 GRD Severe Engine Vibration
If its there when ticking over it must be coming from the engine. I would say possibly a faulty injector causing it to be down on power on one cylinder. Try running it at a fast tickover and slacken the feed pipe nut on each injector in turn, if one makes little difference that will be the one. 17mm spanner I think.
Peter
Peter